Removing the fuel rail ?

[Christopher.]

Chaps

What would happen if i just unbolted it and pulled it out the inlet?

Im removing the AC with the PMS kit and also wanting to fit my matched inlets. I can get to all the bolts on the inlet so that can come off. I just don't want to petrol p*****g out everywhere. Or am I being a tard and wont be a problem ?

Don't have a good record with flammable liquids :S

Cheers

Chris

 

[Seoi-nage]

If the rail is still plumbed in to the fuel line and you pull the whole lot out with injectors still attached then you will loose no fuel you will loose a bit if you disconnect the fuel line to the rail but it won't leak for long

 

[Christopher.]

Cheers, just done it ! Was horrible to get them out, even worse putting them back in !

 

[Seoi-nage]

yeh, I always put a tiny bit of grease on the seals to help them slide in and make sure the seals don't pinch