Reverse Loud Knock

[Joe R26]

It was a mission to do but it's done and the noise has gone. thanks again Harry

 

[MartinR]

where do you get this part from lads? how do you remove the old one from the end of the shaft? do you need to get the new one pressed in?

few more details please i think i now have the same problem

 

[Joe R26]

No need to press it on. You just bash the new one on.

I think Harry had an easier job than me I had to use a sledge hammer to remove my driveshaft from the hub and to remove the sleeve from the other end.

I think the part is available from Renault or I could give you the number of the place we got ours from. It's 70 quid inc delivery.

 

[MartinR]

No need to press it on. You just bash the new one on.

I think Harry had an easier job than me I had to use a sledge hammer to remove my driveshaft from the hub and to remove the sleeve from the other end.

I think the part is available from Renault or I could give you the number of the place we got ours from. It's 70 quid inc delivery.

yes mate number would be great also part number or what its called would be good to mate

cheers

 

[Joe R26]

01254 238163 is the number of the place. Think they specialise in renaults.

The guy we spoke to was Kieran. Don't know what the parts called but just explain it hell know exactly what you mean.

But I'd check your local dealer first as I'm sure they just send you a genuine part from Renault anyway.

 

[Hodgins]

hi mate i got a knocking when reversing, the symptoms are differetn but heres a video of the knock, this was reversing uphill with the wheel locked left, you can hear the two knocks just after the bite point at 4 and 5 seconds

http://www.youtube.com/watch?v=UKNeFheXS3Q&feature=youtu.be

is this what you were experiencing ?

 

[Joe R26]

I'll have a look when I get home. But full lock or driving straight had no effect on mine. It done it all the time.

Best way is to stick the handbrake on put it in reverse and bring up the clutch to the bite. If you get a thud it could be that. Try it in first and reverse a few times.

 

[H4RRY]

It was a mission to do but it's done and the noise has gone. thanks again Harry

Awesome!!! Glad I could help both of us lol

Sorry I haven't replied been working all hours, haven't had chance to think about cars.

 

[H4RRY]

01254 238163 is the number of the place. Think they specialise in renaults.

The guy we spoke to was Kieran. Don't know what the parts called but just explain it hell know exactly what you mean.

But I'd check your local dealer first as I'm sure they just send you a genuine part from Renault anyway.

I should be claiming commision from him with the amount of business he could get from us lot on here

 

[M.A.C]

great little thread here... seems the exact same issue as mine except mine just went pop and just spun up and lost all drive.

is this the part you used to replace the spine - http://www.ebay.co.uk/itm/190700908...4.m1423.l2648&clk_rvr_id=464813019967&afsrc=1

 

[w33 brl]

glad I spotted this thread im having same problem well be having a look next week when i do my n/s wheel bearing

 

[M.A.C]

i had a wheel bearing sound, i'm wondering if it was the spline rubbing away as their would be movement not a tight fitment, will see if the wheel bearing noise disappears once all back together hoping to get it all done by friday.

I would say if you're getting these early warning sounds take it easy, as I didn't and it went and lost all drive and was stranded, just lucky I work at a garage and got it recovered and got the mechanics working on it straight away!

 

[w33 brl]

cars going up on stand tomorrow after work dont need the car this weekend so will get a good look over the weekend and next week

 

[M.A.C]

will let you know my result as soon as my cars all done.

 

[w33 brl]

cheers bud

 

[M.A.C]

Take a look at the sleeve just taking it off the driveshaft. Waiting for the new one from Renault.

photo on this thread - http://www.cliosport.net/forum/show...ever-happened-to-anyone&p=9459800#post9459800

 

[M.A.C]

part arrived the exact same sleeve as the one taking off except it was perfect working order!!

​part number is - 7700858979 RRP at 15.04 + Vat