ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Seat belt removal

Bubbles

ClioSport Club Member
Car  BMW I4 M50
I plan to remove the 2 front belts in a few weeks to get them re-thread? If that’s the correct term (send them off and they come back a new colour)

Does anyone have any tips or a guide on how to do it?

IMG_8141.jpeg
IMG_8140.jpeg
IMG_8142.jpeg
 
  • Like
Reactions: Tom
I'm sure there's a guide in the guides section but it's fault easy if a bit involved. Need to remove the rear panel to get in at them.

But more importantly have you bought back bag OV05HTE?!
 
I'm sure there's a guide in the guides section but it's fault easy if a bit involved. Need to remove the rear panel to get in at them.

But more importantly have you bought back bag OV05HTE?!
You remember my old reg?? That’s impressive! But no.. Sadley not, she is high up in a garage car rack somewhere.. princess.

But I am behind the wheel of another LY- it’s done 49k

IMG_0339.jpeg
IMG_9150.jpeg
 
Metal bar holding the belt by the side of the seat needs to come off, then the B pillar plastics/rear card if I remember right
 
And is it right I should wind the belt out fully and tye it all so it doesn’t retract?
 
And is it right I should wind the belt out fully and tye it all so it doesn’t retract?

Wouldn't worry about that if they are replacing the belts.

To remove the lower bar/rail, you have to remove the bolt and then the bar needs tilting upwards on an angle to get it out.

There's like a slot it goes into, so it just needs a wiggle to get it out.
 
And is it right I should wind the belt out fully and tye it all so it doesn’t retract?
Don't know to be fair? Don't see why you'd need to? Easier to package up and send if they're fully retracted?

Are they replacing the belt or just dying the current ones?
 
Back
Top