Silicone hoses, air filter size help

[plymcl172]

just about to order the hose which goes from the engine to the end of the filter.

what size is it in mm and what bend will i need ie. 45 degree or 90 ?

have seen lot of these hoses in a thread and they look great

any help would be great thanks

 

[MRBILLYUK]

From the throttle body to air filter you'll need a 90 degree 70mm internal hose .

 

[plymcl172]

great stuff thanks very much

 

[plymcl172]

would this one be ok ?
http://www.ebay.co.uk/itm/70mm-2-3-...arts_Vehicles_CarParts_SM&hash=item483faf488b

 

[cs_dave]

How about the breather hose?

 

[plymcl172]

still looking into that atm

 

[MartinR]

13mm inner diameter on the breather hose.

 

[MRBILLYUK]

would this one be ok ?
http://www.ebay.co.uk/itm/70mm-2-3-...arts_Vehicles_CarParts_SM&hash=item483faf488b

You'll need to chop the legs down as 150mm is a bit long , better too long than too short though , then you've got something to play about with . I just got a 13mm silicone hose as well and a 13mm 90 degree bend , a small piece of plastic tube in the end of the 13mm bend and made a hole in the 70mm 90 degree hose with a blob of silicone sealant to hold it secure.

 

[plymcl172]

thanks for this a real big help