South West Rolling Road day results

[Dan 172]

199.9bhp atw, 150 lb of torque. what was everyones looses from the wheel power?

I guess you mean 199.9bhp at the fly?

 

[VXR killer]

yeh sorry, it was at the fly, miss typed. so what were all yoyr guys loses

 

[Greeny.]

Looks like some great results there, Justin must be pleased! Rs Tuner kit is obviously doing good as well

 

[JR]

Very happy fella.

Rs tuner has made such a difference to day to day driving too. A great improvement.

 

[Adey.]

who was the bloke with the k tec itb kit?

 

[JR]

DanR

 

[Jay Payne]

If anyone fancies running again after more mods/problems rectified etc, or missed the day, then Andy at Powerstation is organising a day himself for the Rallye register. He said we could run a few cars then if we wanted. Probably later in the day, after the 106's

bomber?
Wilt?
Macev6?
Schweppy?
Ash87?


Date is:

18th October

 

[Jay Payne]

who was the bloke with the k tec itb kit?

DanR

Should be at the meet tonight Adey

 

[Adey.]

cool, wheres the meet at what time? thought it was tuesday today

 

[bomber]

is at the severn springs at 7.30.

i'll be up for the RR again, will have new IK and matched inlets by then, in theory :S

 

[Adey.]

ill be up for another rr, should have the itbs yay

 

[Jay Payne]

I'll be there on the 18th till 12 i think. Will be in the van tho

 

[scottlm]

Ill be up for going again been speaking to RS tuning and he said get it ran again in 3rd so wanna see if its any different!

 

[mace¬]

If anyone fancies running again after more mods/problems rectified etc, or missed the day, then Andy at Powerstation is organising a day himself for the Rallye register. He said we could run a few cars then if we wanted. Probably later in the day, after the 106's

bomber?
Wilt?
Macev6?
Schweppy?
Ash87?


Date is:

18th October

I'll let you know mate. The Clio is not my favourite at the moment, but was looking at the Dax website and apparently one of those bike engine turbo jobbies are only about 15K from what I could make out...

 

[JR]

I will be there.

 

[Dan R]

who was the bloke with the k tec itb kit?

The kit is actually made and designed by OMEX and is then sold by ktec, GDI etc etc. Same cost wherever you buy from too which is good
Just dont have the kit with the 60mm trumpets. Completely pointless unless all u want is noise. Gain almost no more power. Need the 90mm,s like me

 

[MarkCup]

I'll be there on the 18th till 12 i think. Will be in the van tho

Prediction?

 

[Adey.]

who was the bloke with the k tec itb kit?

The kit is actually made and designed by OMEX and is then sold by ktec, GDI etc etc. Same cost wherever you buy from too which is good
Just dont have the kit with the 60mm trumpets. Completely pointless unless all u want is noise. Gain almost no more power. Need the 90mm,s like me

Do trumpets make that much diff then? The kit ive got keeps the air con but have been told it will take it to 200bhp? Did u have 2 get ures mapped again then 4 diff length trumpets?

 

[Adey.]

ill be up for another rr, should have the itbs yay

Ive just realised thats the day i drive 2 the ring so cant make it sorry

 

[bomber]

I'll let you know mate. The Clio is not my favourite at the moment, but was looking at the Dax website and apparently one of those bike engine turbo jobbies are only about 15K from what I could make out...

i was looking at that too mate, is quite frankley f**king insane though lol. are you going to get it checked over at some point? may end up being something really simple an stupid thats wrong with it?

 

[Adey.]

ill be up for another rr, should have the itbs yay

Ive just realised thats the day i drive 2 the ring so cant make it sorry

 

[Pettsi]

Some good gains.

 

[Jay Payne]

I'll be there on the 18th till 12 i think. Will be in the van tho

Prediction?

Books at 90bhp iirc, more than enuff for the 3tons of orangeness

 

[mace¬]

I'll let you know mate. The Clio is not my favourite at the moment, but was looking at the Dax website and apparently one of those bike engine turbo jobbies are only about 15K from what I could make out...

i was looking at that too mate, is quite frankley f**king insane though lol. are you going to get it checked over at some point? may end up being something really simple an stupid thats wrong with it?

Going to get it tested on a different RR with a mobile air feed for the side pod and see what that does and go from there. At the moment though, its going up for sale early September. No rush to sell it but 300+bhp and less than 500kg tickles my fancy.

 

[Jay Payne]

^ surrey on the 6th sept?

 

[mace¬]

Going to Coombe on the 6th. Going to try and get it booked in local somewhere. Was going to give Interpro in Thornbury a ring, they seem to have a good rep. See if they've got a seperate air feed.

 

[Dan R]

The kit is actually made and designed by OMEX and is then sold by ktec, GDI etc etc. Same cost wherever you buy from too which is good
Just dont have the kit with the 60mm trumpets. Completely pointless unless all u want is noise. Gain almost no more power. Need the 90mm,s like me

Do trumpets make that much diff then? The kit ive got keeps the air con but have been told it will take it to 200bhp? Did u have 2 get ures mapped again then 4 diff length trumpets?

No the kit you have bought will have the 90mm trumpets( i hope) if not then you have no hope in hell of getting 200bhp. Id ring them and ask if i was you. Where did u get them from??? If its ktec themselves then i think they supply 60's. 90mms mean you have to remove the slam panel but thats all. 60mm's are pointless tbh. Length is very important on them. Thats what makes the difference and gives you the power and torque!

 

[Ash87]

Is a possibility for the 18th i will let you know Jay, goin to book into ktec soon for a decat n remap so be good to see the gains.

 

[PeteCup]

Was going to give Interpro in Thornbury a ring, they seem to have a good rep. See if they've got a seperate air feed.

We have a rolling road in Stroud now too, its in Maynard Ltd http://www.maynardltd.co.uk/automotive/site1/index.htm £40 for a power run and quick diagnostics IIRC.

 

[Rich]

I noticed the signs for that the other day when I drove past - any good ?

 

[PeteCup]

I noticed the signs for that the other day when I drove past - any good ?

To be honest mate i dont know, its a mate of mine that owns it and hes sound, also heard good things but cant say for sure. They do alot of cylinder head work so quite clued up. I'll get mine in for a power run and report back.

 

[mace¬]

I noticed the signs for that the other day when I drove past - any good ?

To be honest mate i dont know, its a mate of mine that owns it and hes sound, also heard good things but cant say for sure. They do alot of cylinder head work so quite clued up. I'll get mine in for a power run and report back.

Do you kniow if they have a seperate air feed or if its only from the front?

Cheers.

 

[Dan R]

Do trumpets make that much diff then? The kit ive got keeps the air con but have been told it will take it to 200bhp? Did u have 2 get ures mapped again then 4 diff length trumpets?

No the kit you have bought will have the 90mm trumpets( i hope) if not then you have no hope in hell of getting 200bhp. Id ring them and ask if i was you. Where did u get them from??? If its ktec themselves then i think they supply 60's. 90mms mean you have to remove the slam panel but thats all. 60mm's are pointless tbh. Length is very important on them. Thats what makes the difference and gives you the power and torque!

I apologize. That info is not correct that i gave you. The short trumpets will give u roughly the same bhp right at the top end but will not have the same low down grunt or torque that you get with the longer trumpets.
I still wouldnt have the short ones tho cos youll constantly have to rev the life out of it

 

[Ian_182]

Evo's rarely make book power, yet pre-evo's do, not sure why.

Ive read this too.Its weird

 

[bomber]

mace, i think even power station have 1 movable air feed because they use it on the scooby, coming down over the engine on top of the intercooler.

does the v6 have intake on both sides or just one?

 

[bomber]

http://www.powerstation.org.uk/images/subarutuning1.jpg

 

[mace¬]

mace, i think even power station have 1 movable air feed because they use it on the scooby, coming down over the engine on top of the intercooler.

does the v6 have intake on both sides or just one?

Intakes just on the passenger side, feeds straight into the air box. Thats what i needed, might give them a call tomorrow. See what they say.

Cheers mate. Thank you.

 

[Jay Payne]

FAO Dan 172:

Your pm inbox is full, Ive got your tow eye, will be giving it to Anim@l tomorrow.

 

[lemonnobby]

when i was stood on the passenger side of the cars while they were being tested there was very little air flowing down the side

 

[Dan 172]

FAO Dan 172:

Your pm inbox is full, Ive got your tow eye, will be giving it to Anim@l tomorrow.

Cheers mate!