Spacers

[Deeg]

I am gonna have to put spacers on my front wheels, when the alloys go back on because there is a little bit of rubbing on full lock. so 2 questions.

Theyre 3mm spacers, will the standard bolts (12mm i think) be ok? or do i have to buy longer bolts?

Do i need to put some on the back wheels for any reason? If the fronts are 3mm further out than the back, will this mes anything up, like when i get it lasered aligned after it being lowered.

Thanks.

 

[BRUN]

make sure you can get a minimum of 6 turns on the bolt, full turns

 

[Deeg]

Cheers Mate.

 

[Friction]

as for doing the rear, no need, the track is wider on the front as standard anyway



personally i would have just not bothered with spacers and put up with not having full lock, as widening the track will cause more rapid wear on suspension parts

 

[clio__chris]

the full lock is bad enough as std without loosing any!!!

 

[Deeg]

Just didnt wanna wreck the tyres,w ould rather have to replace the suspension than get 3 points for having tyres wrecked on the inside edge, or worse get a blow out or something daft.

 

[Friction]

my point was, dont use full lock, just a full turn of the wheel would do, turn that 3 point turn into a 99999999999 point turn...

 

[Deeg]

oh right, lol.

Gotta use full lock on my street, its the only way to get a space. lol.