ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
bass_direct
ClioSport Club Member
375bhp mk1 +Williams
ebay, £30
fiesta 1.25
i have some black plastic ones on mine
fiesta 1.25
Yeh 2118s
RB 182
I should be popping to Speedline on Friday so can always ask when im there.
fiesta 1.25
No idea arnt the cup racer ones 2020's?
Eh?
Think what you're on about are the palmersport ones.
These arent the cup racer ones. They were made for the palmer trackday cars, with et43.
The cup racers used 2020's, similar offset to cup wheels.
After a while they started using the alloy 2118's as the 2020's cost so much to replace and were pretty fragile in a pile up.
172
Yea thats right, but people say the centre caps dont fit any 2118's. Ive modified the centre caps to fit on mine, i would think they can be made to fit on the cup racer ones too.
I could be wrong tho!
so one minute the 2118's arn't cup racer wheels and then they are . . .make your mind up fella
fiesta 1.25
lol
Mine are 7 x 15" anyway thats all i know and the cup racers use the lighter 2020's
Mine are 7 x 15" anyway thats all i know and the cup racers use the lighter 2020's
172
Theres no groove on mine either, the centre caps were a tight fit but i put a dab of superglue on just to make sure they didnt fly off!
On the fronts the centre cap would'nt go on because the driveshaft thread stops the centre cap going on ( obv near the hub nut ) All i did was pop the front of the centre cap off, grinded a hole for the driveshaft, and then glued the front back on the centre cap.
That sounds like bull but i know what I mean!
On the fronts the centre cap would'nt go on because the driveshaft thread stops the centre cap going on ( obv near the hub nut ) All i did was pop the front of the centre cap off, grinded a hole for the driveshaft, and then glued the front back on the centre cap.
That sounds like bull but i know what I mean!
what size were they? Had a 60mm one that was too small . . .
172
Not sure mate, i will measure in the morning.
Clio 172 RS2
BANNED? LOL
Cup racers used 2020 which were magnisium and the road versions are 2118's alloy.
The wheel design is exactly the same bar the 2020's have the speedline name embossed into the rim amd the 2118's have it printed on in blue
Some lad on here a while back bought centre caps with his 2118's so you must be able to get them
The wheel design is exactly the same bar the 2020's have the speedline name embossed into the rim amd the 2118's have it printed on in blue
Some lad on here a while back bought centre caps with his 2118's so you must be able to get them
Right,
The Original clio cup race wheel - 2118 ET48.5
They then started using - 2118 ET38 sometimes the 2020 mag version but that cost to much to replace as said.
The 2118 ET43 is a high duty palmersport clio cup wheel, designed to take abuse from the general public on the palmersport driving days. It weights a lot more than the et38 version.
I have owned quite a few sets of 2118's over the last 4 years not one has been designed to be used with a centre cap. On the rears you can use the hub covers that can be found on lesser spec clios and painted a colour of your choice, i havent found anything for the fronts yet.
I wouldnt want a modified centre cap on my car because theres a chance it will fall out, the wheel wasnt designed for centre cap's so i wouldnt risk it. And i wouldnt glue them in either...
The Original clio cup race wheel - 2118 ET48.5
They then started using - 2118 ET38 sometimes the 2020 mag version but that cost to much to replace as said.
The 2118 ET43 is a high duty palmersport clio cup wheel, designed to take abuse from the general public on the palmersport driving days. It weights a lot more than the et38 version.
I have owned quite a few sets of 2118's over the last 4 years not one has been designed to be used with a centre cap. On the rears you can use the hub covers that can be found on lesser spec clios and painted a colour of your choice, i havent found anything for the fronts yet.
I wouldnt want a modified centre cap on my car because theres a chance it will fall out, the wheel wasnt designed for centre cap's so i wouldnt risk it. And i wouldnt glue them in either...
Iv got a set of 2118's in a et38 and they weigh a frigging tonne !! Hit some proper hard pot holes in them and nothing will bend them. To think Palmer Sport ones are even stronger and even heavier, not sure why they'd need to be
There was definetely a lad on here who bought some black centre caps with his 2118's as a extra cost.
Sure i saved the photo's somewhere. Will have a look later.
They look better without them regardless
There was definetely a lad on here who bought some black centre caps with his 2118's as a extra cost.
Sure i saved the photo's somewhere. Will have a look later.
They look better without them regardless
Coby.
ClioSport Club Member
XC60-R.......V40-R
Simple answer is you can't get any.
fiesta 1.25
do i have to get pics of my car up?
