Steering squib alignment help 🤔

[finch wxm]

I have a squib here and its different to my other which goes blue or yellow in the window.

Is this set correctly 🤔

 

[JamesBryan]

That's the bit with the wiper/lights stalk on.

The steering angle sensor is missing and it clips in on top of that.

 

[finch wxm]

That's the bit with the wiper/lights stalk on.

The steering angle sensor is missing and it clips in on top of that.

I see , looks like i need a bloody squib aswell then 🥲🥲🥲

 

[finch wxm]

That's the bit with the wiper/lights stalk on.

The steering angle sensor is missing and it clips in on top of that.

Can you bolt the steering angle sensor on to any squib ?

 

[JamesBryan]

Can you bolt the steering angle sensor on to any squib ?

It just clips in on top of that.

Can just about see the angle sensor here with the yellow dot.

 

[finch wxm]

It just clips in on top of that.

Can just about see the angle sensor here with the yellow dot.

View attachment 1613690

I will check my red trackcar then. Maybe that has one on. Is yellow mean is in the correct position ?

 

[JamesBryan]

I will check my red trackcar then. Maybe that has one on. Is yellow mean is in the correct position ?

Yeah the yellow dot and the fact that the slots are horizontal at the 9 and 3 o'clock position.

The squib with the wires sits so the wires are at the top at the 12 o'clock position, but not sure which way yours has turned.

Need to make sure your steering column is straight as well, I can't tell from your picture. There should be a small notch to denote the top.

 

[finch wxm]

Yeah the yellow dot and the fact that the slots are horizontal at the 9 and 3 o'clock position.

The squib with the wires sits so the wires are at the top at the 12 o'clock position, but not sure which way yours has turned.

Need to make sure your steering column is straight as well, I can't tell from your picture. There should be a small notch to denote the top.

Will double check tommorow as i have put the epas column on so will see if the notch is at the top

 

[JamesBryan]

Will double check tommorow as i have put the epas column on so will see if the notch is at the top

It will make everything easier if it's all lined up, saves having to mess about tweaking it if something is out of alignment.

 

[finch wxm]

It will make everything easier if it's all lined up, saves having to mess about tweaking it if something is out of alignment.

Dying to get it finished and on the road, having a broken wrist doesnt help 😂

 

[finch wxm]

It will make everything easier if it's all lined up, saves having to mess about tweaking it if something is out of alignment.

Does it need calibration with clip once fitted it ? I removed the steering angle sensor from my red car with the butchered airbag connectors removed.

 

[JamesBryan]

Does it need calibration with clip once fitted it ? I removed the steering angle sensor from my red car with the butchered airbag connectors removed.

Hard to say, some do some don't 😔