Still trying to get my window working, can anyone confirm a few things for me?

[CrippsCorner]

Right... situation is, no movement on the passenger side window. I've replaced the regulator but it didn't work. Fearing it was faulty, I now have another one. Same issue.

I followed a thread on here about other issues including the UCH, of which I've done some testing and tbh it's not leading to it being that.

Today I applied my very limited knowledge of electronics to the issue. This is what I found... continuity between the switch and the socket for the regulator is perfect. I test for voltage coming from the socket and get 12v on both when idle, and one jumps to 0v when the window is told to move up, and the other ones jumps to 0v when the window is told to move down. Is that what's meant to happen?

If it is... the way I see it, the regulator is fine, the wiring is fine, the power supply is fine, but put it all together and it doesn't work. Driving me crazy!

 

[CrippsCorner]

No one?

Is there a circuit diagram available for the section that I'm talking about? Also... does anyone know the part number/description of the loom required if I were to try out another one? Thanks.

 

[Dan@SJM]

Have you checked the drivers side passenger window switch?

 

[CrippsCorner]

Yup... does exactly the same as the passenger side.

Half tempted just to give up lol, I never lower that window anyway. Suppose it'll be a pain when it comes to selling it though.