stripping interior

[cander08]

hey ppl tried stripping the back out today . couldnt get the back bench out . has anyone else had this problem

 

[Curtis!]

Nope, was really, and I mean utterly simple as can be.

Two bolts where the two haves meet and the rest just fell out.

 

[AhmedRSi]

What was the problem? couple torx bolts and its out! They can be a b**ch to get out though if corroded

 

[Beef-Mc]

That Isofix bar is an utter cnut of a job.

 

[cander08]

thats great guys was trying to get it with a torque bit on a screwdriver. it was coming then went stiff .thought it maybe had a backin nut on the underside. ill need to get a socket set into it. thanks

 

[bomber]

its a b*****d to get out, most people jam something in it once the torx bit is broken on the bolt, think i sawed mine out the got mole grips on it in the end

 

[maynard]

yeah i had this problem, my bolts for the isofix bar didn't have the torx bit in the head either. i could only get the bolt so far out and then just cut the head off it. still got the rest of the bolt stuck in th hole now!

 

[clio_luke]

mine was very very simple to remove :S
like a 2min job.

 

[jez4130]

yeah those bolts are verrrrry stiff! just keep going, they'll come out eventually

 

[jack_davey]

squirt of wd40 usually helps

 

[RichCup]

Ratchet + extension bar ftw!

 

[JB]

That centre bolt is exposed on the underside of the car I think so most of them have a whole load of crap clogging up the thread on the bottom. Makes it a b**ch to remove in some cases. As said, just get a set of mole grips on there if it isn't moving

 

[Vish]

I had the same problem with the one that has to come out fully. I ended up flushing the torx bit on the top. Ended up using a lot of WD-40 and mole grips.