Stupid question about studs and spacers

[Fantom]

Just been searching but can't find the answer.
I have 15mm bolt to hub spacers from Dan on here.
I also have some studs and nuts.

Do I:

A: screw studs into hub, slider spacer over and do up wheel nuts
B: put spacer on and screw studs through both spacer and hub
C: bolt spacer on with supplied bolts, then screw studs into the spacer

Thanks
​Steve

 

[Tony Hunter]

C

Don't to loctite everything.

 

[Dan@M.A.D]

A or C really!

 

[Fantom]

Please tell me this is correct!

I'm not sure how you're supposed to torque up the spacers with an 8mm allen key. I just did them as tight as possible by hand.
I used Loctite 2700 on both the studs and the allen key bolts.
The studs are a bit too long but I can't see this being a problem other than taking ages to get the nuts off?

Really pleased with the spacers. 15mm is perfect. Glad I didn't go for more

 

[Matt e]

You've loctited the spacers on?

 

[Joe#]

You've loctited the spacers on?

The studs that are in the spacers are yes. But the spacers can be removed still.

 

[Matt e]

The studs that are in the spacers are yes. But the spacers can be removed still.

I used Loctite 2700 on both the studs and the allen key bolts.

well it sounds like he's loctited the spacer on(which are held on by the allen key bolts)

 

[Joe#]

Oh god, didn't see that bit!

 

[Sam@NP]

Personally I wouldn't screw the studs into the spacer I'd screw them into the hub as its steel and less likely to come loose or pull the threads.

 

[James28]

I would've just bought spacers that could slide over the studs tbh .

 

[Fantom]

You've loctited the spacers on?

​Why is that bad? I don't plan on removing them. And it's not like its impossible to remove them either

 

[Fantom]

I would've just bought spacers that could slide over the studs tbh .

I could have done that but I followed the advice above from Tony

 

[Tony Hunter]

I could have done that but I followed the advice above from Tony

They are not going to come loose or fall off now.

 

[Fantom]

That's what I was hoping