TO ALL THE PEOPLE WHO HAVE REMOVED THERE STANDARD INDUCTION HOSE

[seanburns182]

I have found a hose that will fit on my car but it doesnt have a breather pipe attachment, do i need to buy one of them catch pot thingys or just fit a little breather filter to the end of the pipe

 

[Tunst]

i just bought a breather pipe filter for mine seemed to be just as good...



Cumbrian FTW!

 

[DannyR]

I have no hose, but when I had my 45 deg bend I just cable tied a bolt into the hole, important you leave a little air gap though

 

[Mark One]

i just bought a breather pipe filter for mine seemed to be just as good...



Cumbrian FTW!

This. Your not looking to pass any Euro emission regs for HC emission, so get yourself a little breather filter. Saves you a few bob on an expensive bend, and saves you some sticky oil residue down the inlets.

 

[franx]

I have no hose, but when I had my 45 deg bend I just cable tied a bolt into the hole, important you leave a little air gap though

You are talking about a phase 1, idle control ?
He is talking about the oil breather (182) ; this should'nt be tied off

Put one of those little breather-filters on it (cheapest option), sometimes you will get an oil smell but it's not too bad