Underseat Wiring

[2Damnsly Andy]

Hi all, as some of you know I have just removed my PH1 front seats (single handedly and with alot of under car swearing) and I am now left with some wires and I'm guessing pretensioners inside the sills next to the seats. Can I remove all the wiring and pretensioners with no issues and if so where does the wiring link to the loom so I can unclip it rather than cut it out?

Thanks Andy

 

[2Damnsly Andy]

Anyone able to help?

 

[James28]

Pretensioners would've been attached to the seats so they'll already have come out.
You'll just have the airbag warning light on.

 

[len_beach]

Does removing this wiring bring on th airbag light if you've disabled the pretensioners with an RSTuner?

 

[2Damnsly Andy]

So what are the black things screwed to the sills? And where does the harness connect to the loom so I can unclip it.

 

[182_Adam]

it connects under the seat (grey and black connector on a ph2) a 3.3ohm resistor is needed to keep the airbag light out. check the guides section for more info.

 

[James28]

Black things on the sills? If its what I think you're talking about its just the lower mounting point for the seatbelt, Its just a weird shape bit of metal tube. Unscrew the torx bolt and it just comes out and the belt slides off it.

 

[2Damnsly Andy]

I hope its not raining Thursday as I need to get the seats in and get the rest of the gubbins sorted out in the interior.

Still need to know where I unclip the wiring in ther floor from the dash loom.