updated boot build

[Rorrie]

http://erc.qmuc.ac.uk/cliosport/gallery/full/1072311085__CIMG0402.jpg

http://erc.qmuc.ac.uk/cliosport/gallery/full/1072311248__CIMG0403.jpg

Updated fabric, sub box, new amp, new crossover window ect

the right side wall - is going to be the same as the left wall but with a power cap were the crossovers are - and fans will be install symetrically on the right.

fabric will go over the sections of wood visable under windows ect and sub cable will be sorted out!!
and i may put either an EQ in the middle or another 2 channel amp to run 2 6" subs for under drivers seat - not sure yet tho.



What do you think??

 

[16vneil]

very nice mate

i used 2 have an old skool rockie

what ya gonna do with the speaker wire from sub 2 amp?

neil

 

[Rorrie]

thank v much

i really like it (rocky) - apart from the fact ive blown a channel!!

drill a whole in the floor just below the sub - run it up there - so it is only showing for 10cm or less

 

[Mikefb]

very nice mate!! did you make all the panels yourself or were they made 4 u? if you made them how did you get them to fit so good?

y not drill a hole just underneath the sub on the same panel that way less wire will be showing!

 

[Rorrie]

^^ thats what i meant

I made it all myslef - its a question of cutting pannels pannels as close as poss then slowly editing them to get the perfect.



Cheers for comments so far!

 

[Dean]

nice m8

not keen on that stuf normally looks nice tho!

 

[Rorrie]

on the fabric??

 

[ian h]

very neat! will look very nice when finished!!

 

[Lunner]

You must have a lot of cabling going to and fron the front of the car, 2 power cables for amps, 2 lots of RCA leads, and four lots of speaker cables (on to each of the RHS and LHS mids and tweeters), or have i got the wrong stick again.

Was thinking of doing a similar install, getting all my ICE sorted in the next few months, would be very interested to know the details of how it all connected up together.

 

[Rorrie]

you can run 1 power cable then spilt it into 2 - but i started with 1 amp and went to 2 so i have 3 power cables running to boot - 2 for the amps, 1 for the fans, remote cable, 2 sets of rca cbales, 2 mid speaker cable and 2 tweeter cable - but you hide them under you trim ect.

 

[Lunner]

Yeah cool, just trying to gather ideas for my monster install im planning for the summer - when the weather improves abit - f**king inconvienient when you have to do all ur work on ur drive.

 

[Bubbles]

Verrrry nice

 

[Mikefb]

Quote: Originally posted by Rorrie on 25 December 2003


I made it all myslef - its a question of cutting pannels pannels as close as poss then slowly editing them to get the perfect.

would it be possible for you to send us a templete for your panels please so i have a rough guide for the size cheers mate.

p.s empty ur pm

 

[Rorrie]

yer ive got to make up the right hand side one - may do it tomorrow - if so il post a template



PS - cheers!!

 

[Tom]

Looking good

Nice layout, mine takes up so much more space than that

 

[MAXIBOY]

looks fantastic whats it sound like with just one sub

 

[Rorrie]

its OK - ive got to fix the rocky amp - as its only running off 1 channel, so not much power getting to it. I thik i would have prefered a 12" now but oh well, can do that next time! - but im also just running in the sub, and havnt set up gains ect properly yet

 

[MAXIBOY]

haven,t decided on my system yet but don,t want to add to much weight. so will be intrested to hear what you think when its run in

 

[Lunner]

What different in sound do you get by having the cone of the sub sticking out of the box as opposed to it being inside the box?

 

[Rorrie]

none, but you may have to reverse the polarity of the subs (swap + and -) to prevent bass cancelation.

 

[maff]

very nice, what material is it?

 

[Rorrie]

cheers, its a faux suede, was going to use alacantara(sp) but its just too expensive