Very quick question..

[Šįk]

Hey,

about to order some 30mm (2x15mm) spacers, my wheel offset Is whatever the old 15" cup racer Oz F1 (magnesium) offset is :S ???

So I need to know is..

-what lenth bolts am I going to need for them to fit!?
-what type of bolt is it I need, iirc there are four different types, which type do I need!?

Sorry, I ain't at home to find out myself until Friday and need to know asap!

Please help.

Cheers, piers.

 

[Šįk]

Comeon guys!!, must b some1 who knows n can help!?

 

[Šįk]

So know1 knows what the standard thread lenth is on a wheel nut/bolt??


Cheers guys

 

[Nick_P]

You just need bolts about 15mm longer than standard. Contact rare rims

 

[Šįk]

Ino but I have no idea what they are to start with..? Guessing 40-50mm as standard but no idea :S and don't want to get 75-80mm to be safe incase there tooo long :S

 

[rich-6]

Take one out and measure it

 

[Nick_P]

I did know. But i cant remember. ha.

 

[Nick_P]

it will be like 50mm total, or less

 

[Šįk]

Take one out and measure it

Lol, read original post..

 

[Šįk]

it will be like 50mm total, or less

Ahh but if I go n buy 75mm ones I don't want them to be too long n not tighten up because the female thread is too short :S if u understand :s or is the hub drilled and thread straight through with back no wall!?

 

[White16valver]

Have you searched for 'offset' yet?

IIRC the F1s are 43mm as I needed to get 7mm spacers to take them to the standard 36mm valver offset.

I think...

 

[Šįk]

Ahhh but tbh mate, after thinking about it shouldn't matter as the gap is what iv measured so the spacer will just adjust that so the offset isn't actually important in this situation now thought it might of but it ain't..

Can't believe no knows the actual lenth... Surely people do, they just beig lazy arses n not posting lol!

Last chance I have of getting these for Friday/sat are ordering them early tmrw morning!!

 

[Tucker]

Just search the f**king internet.

Screw it for all that effort you went to to write 500 words on here you could have

PHONED RENAULT

I know but i'm not going to tell you for insulting your own intelligence.

 

[Šįk]

Oh, look, we have an utter n complete Knob in the room!

Forget it..

 

[maynard]

on a standard 19mm renault wheel bolt - the thread length from start of thread to the tip at the bottom of the bolt is 23mm.

 

[Šįk]

on a standard 19mm renault wheel bolt - the thread length from start of thread to the tip at the bottom of the bolt is 23mm.

Thankyou Maynard

seems quite short doesn't it..

 

[maynard]

yeah surprisingly!

as long as they're torqued up at the correct nm they'll be fine!

 

[Šįk]

Ok well cheers anyway mate.

Thankyou.

 

[maynard]

no worries, glad i had some spare in the shed! there was no way i were gonna take a bolt off the wheel in the dark!

 

[Šįk]

Haha yea I don't blame you.

Cheers, piers.