Which Other Manufacturers Wheels Fit Clios?

[Faxo]

As the title! It just menas i can widen my search!

Cheers :rasp:

 

[davebem]

Not many, theres a few that are 4X100 but the centre bore is always too small or too big, even wheels from a BMW mini would fit if it wasnt for the centre.

 

[Pep]

ive seen mini wheels on a 172 on here a month or so ago, looked really good.

4 stud vaux wheels will fit i think, vw aswell, get yourself some nice bbs wheels and lower it, i think that would look awesome on flame.

 

[bmh.01]

Anything with the right offset thats 100x4 with a centre bore of 60.1mm or runs spigot rings (only aftermarket iirc).

http://www.alloyguide.co.uk/
Look for a manufacturer that has the same specs as the Clio and you'll be away.

 

[C.slicker]

Yeah as stated above, just ensure the bore size is greater than 60.1. Also make sure the offset figure is no lower than 38 or you will get rubbing on the arch and lowering will not be possible.

Sam

 

[Faxo]

Yeah as stated above, just ensure the bore size is greater than 60.1. Also make sure the offset figure is no lower than 38 or you will get rubbing on the arch and lowering will not be possible.

Sam

That figure of no lower then 38 goes against that site? It says 35 to 38?

 

[davebem]

Bore size is different to offset, offset is how much it sticks out centre bore is the size of the centre of the wheel.

 

[bmh.01]

Yeah as stated above, just ensure the bore size is greater than 60.1. Also make sure the offset figure is no lower than 38 or you will get rubbing on the arch and lowering will not be possible.

Sam

That figure of no lower then 38 goes against that site? It says 35 to 38?

I've got ET37 SuperTs on mine and no rubbing at all, and its lowered too.

 

[Gumby]

Yeah as stated above, just ensure the bore size is greater than 60.1. Also make sure the offset figure is no lower than 38 or you will get rubbing on the arch and lowering will not be possible.

Sam

That figure of no lower then 38 goes against that site? It says 35 to 38?

Anything from 35-45 would be OK dependant on tyres I think. I've got ET45 on mine and don't have any rubbing (standard ones were 36)