ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Why my BHP gone...??
- Thread starter AliasOmega
- Start date
Shhh
he he... 
The torque figure is not necessarily a load of rubbish.
Torque at the wheels depends on what gear you are in.
Power is effectively torque x rpm. Say you have an engine that produces 100lb/ft torque and you stick a gearbox on the back of it that gives 1 revolution at the wheels for every 2 revolutions of the engine. The torque at the wheels is doubled, but the revolutions halved. This means that the power remains the same but the gearing changes the amount of torque you get at the wheels, and the rpm of the wheels.
Lower gears=more torque (and therefore more acceleration), but lower speed.
Higher gears=less torque (and therefore less acceleration), with higer speed.
If you're worried about the figure just ask them exactly what it is. You should be able to calculate flywheel torque from this figure if you know tyre diameter, gear ratio etc, but you may as well just derive the torque from the power.
Torque at the wheels depends on what gear you are in.
Power is effectively torque x rpm. Say you have an engine that produces 100lb/ft torque and you stick a gearbox on the back of it that gives 1 revolution at the wheels for every 2 revolutions of the engine. The torque at the wheels is doubled, but the revolutions halved. This means that the power remains the same but the gearing changes the amount of torque you get at the wheels, and the rpm of the wheels.
Lower gears=more torque (and therefore more acceleration), but lower speed.
Higher gears=less torque (and therefore less acceleration), with higer speed.
If you're worried about the figure just ask them exactly what it is. You should be able to calculate flywheel torque from this figure if you know tyre diameter, gear ratio etc, but you may as well just derive the torque from the power.
Shhh
Yup, think ill ebay it as i think its too loud for me..
Shhh
So, can the bhp be relied upon then.? What about the increase in bhp then.? Can that be confirmed as accurate ish.?
Clio 197
Can't beat the ol' panel filter eh?!
Shhh
omar said:
More like a cone filter to me in a special home with a bit of cold air feed to make it look nice.
Ill see what RR's are around here for tomorrow that aint too expensive....whats a good price for 2 runs, one with filter, one with airbox.?
Shhh
Got a camera tho dont think it can record sound. Its definately louder than standard up too about 4.5k rpm then it goes quiet..
Im up in Peterlee (Nr Sunderland / Hartlepool) if anyone wants to come see it. May take it off later as we dont like it. Sounds a bit OTT for what we use the car for.
Im up in Peterlee (Nr Sunderland / Hartlepool) if anyone wants to come see it. May take it off later as we dont like it. Sounds a bit OTT for what we use the car for.
Shhh
Some pics of the kit, as you can see ive removed it from the car. All is there to put the kit onto a Clio 182 / 172.
Cant put the item in the forsale section as im only a forum user.
Cant put the item in the forsale section as im only a forum user.
Nippy white cup
I went to a scooby RR day recently and I had a similar thing happen with my readout....I don`t know the in`s and outs but apparently they uses the pulses of the battery (!?) to get the torque figures. The couldn`t do it so they read off the plug leads but they were too close together so it picked up two sets of pulses. This doubled my torque reading (321lb/ft) I have no idea how this works but everyone else got around the right reading so it must work. Everyone was buzzing about it at 1st as it would obviously be pretty quick with that torque lol
Chris
Chris
looks a proper shite casting:
My 5yr old bro could do better with playdoh.
My 5yr old bro could do better with playdoh.
Shhh
Danlp6 said:
Thats cuz its been fitted to the car, and yes, id like to see your 5yr old brother make one of them plz...
Similar threads
