will this fit my car ?

[Aluco]

will this fit a 55 plate 1.4 16v dynamique ?

http://cgi.ebay.co.uk/Renault-clio-...kparms=72:636|39:1|65:12&_trksid=p3286.c0.m14

He says its for clio 2's before 99 but they used to have the same thing on ktec (im sure) and on there it said it fit mine :S

thanks for the advice
:approve:

 

[Has]

Yes that should fit.

Renault only did them for the mk2 clios as an option.

Its the Sebring one.

 

[Aluco]

Thanks mate =]

 

[alexbleubolt]

it might not fit the center section though,

 

[Aluco]

it might not fit the center section though,

Whys that ?

 

[Aluco]

Bump as i bought this >_<

 

[clio1996]

no it wont fit. my sabre tooth tiger wouldn work after i fitted it to its brain.

 

[Aluco]

no it wont fit. my sabre tooth tiger wouldn work after i fitted it to its brain.

are you the guy who just asked if english people lived in "shacks" because you saw a picture of a caravan ?

Righhttt....

anyone who isn't on LSD got an awnser ? :approve:

 

[jamesp24]

Ask him to measure the pipe.

 

[Aluco]

Ask him to measure the pipe.

If it isn't the same size could i get a sleeve or something to make it fit ? Or would i need a new centre pipe making ?

Thanks

 

[Laura]

well if youve already bought it, try it if it dont fir sell it lol

 

[Hazza]

IIRC, i was going to buy this from KTEC, but it doesn't add any exhaust noise.

As Laura said, seeing as you already bought it, try it, if it don't fit then sell it on.

 

[Aluco]

well if youve already bought it, try it if it dont fir sell it lol

I'd prefer to know if its going to fit before i get it delivered because if it wont fit i'll just reinburse the feller his ebay costs and an extra couple of quid for the hassle

 

[Hazza]

TBH, i think it will fit judging purely on the pic.

IF it don't fit, i'll buy it off u for £20

 

[BioHzrd]

IIRC, i was going to buy this from KTEC, but it doesn't add any exhaust noise.

As Laura said, seeing as you already bought it, try it, if it don't fit then sell it on.

It does but it sounds like a wet fart !!! mate had one on his old Ph2 not the best invesment imo

 

[Hazza]

Well Aluco bought it for just over £30... not bad imo..

But thats only if he can get it fitted on the cheap!

 

[Aluco]

IIRC, i was going to buy this from KTEC, but it doesn't add any exhaust noise.

As Laura said, seeing as you already bought it, try it, if it don't fit then sell it on.

It does but it sounds like a wet fart !!! mate had one on his old Ph2 not the best invesment imo

Oh dear, is there no way around that ? adding extra baffles or something ? :S i didnt want much noise at all if any

 

[Aluco]

Well Aluco bought it for just over £30... not bad imo..

But thats only if he can get it fitted on the cheap!

Uncle works at a exhaust place

 

[Hazza]

TBH, i doubt it'll do much noise than what the standard one does...

I reckon it'll look smart, but only fitting it can tell us what it sounds like, and whehther it fits

 

[Hazza]

Well Aluco bought it for just over £30... not bad imo..

But thats only if he can get it fitted on the cheap!

Uncle works at a exhaust place

No excuse to recieve it and go and get it fitted!

 

[Aluco]

Uncle works at a exhaust place

No excuse to recieve it and go and get it fitted!

Just been out to my car and squueeezed underneath (60mm )

and i cant see the point where it joins on :S ?

Im not going to need pipe work doing am i, thats the reason i went for this one >__<

 

[Hazza]

They cut at ur centre section and weld it on....

 

[Aluco]

They cut at ur centre section and weld it on....

Ill give it a go then =]

Im assuming i can just get my standard backbox welded back on when i want to go back to standard ?

 

[Hazza]

indeed, thats what i had to get done on mine.

After i got bored with my peco exhaust!

 

[Aluco]

indeed, thats what i had to get done on mine.

After i got bored with my peco exhaust!

cool thanks for the help i haven't got much knowledge in the exhausts department.

 

[Hazza]

TBH, me neither, but i know just about enough!

Hope it goes well, but if it doesn't let me know, as i might take it off ur hands...

 

[Aluco]

Alright mate no problem

 

[Has]

No they dont weld it on!!

Its a genuine Renault Accessory.

To fit the following exhaust, you need to cut the origional exhaust as it is one complete section.

Then the backbox is fitted to the origional centre section using a Renault sleeve (available from Renault, £21.50+VAT)

This simply joins the 2 parts together. The pipe work should be the same size.

If you look in the Renault Accessory Catalogue it looks pretty nice for a Renault jobby

 

[Aluco]

No they dont weld it on!!

Its a genuine Renault Accessory.

To fit the following exhaust, you need to cut the origional exhaust as it is one complete section.

Then the backbox is fitted to the origional centre section using a Renault sleeve (available from Renault, £21.50+VAT)

This simply joins the 2 parts together. The pipe work should be the same size.

If you look in the Renault Accessory Catalogue it looks pretty nice for a Renault jobby

Ooh so i need to get one of these sleeves ? instead of them cutting the original pipe would it be much more expensive just to get another centre section made up ? or would that mean messing with that box in the middle ? or would removing the current system from the cat back and getting a new system made without the centre box and this new backbox give it a nice note ? Argh!

ps. Do you by any chance have the part number for the sleeve ?

 

[Aluco]

also where can i find this renault accessories catalogue ?

is it avalible online in PDF maybe ?

 

[Aluco]

No they dont weld it on!!

Its a genuine Renault Accessory.

To fit the following exhaust, you need to cut the origional exhaust as it is one complete section.

Then the backbox is fitted to the origional centre section using a Renault sleeve (available from Renault, £21.50+VAT)

This simply joins the 2 parts together. The pipe work should be the same size.

If you look in the Renault Accessory Catalogue it looks pretty nice for a Renault jobby

Ooh so i need to get one of these sleeves ? Do you by any chance have the part number for the sleeve ?

also where can i find this renault accessories catalogue ?

is it avalible online in PDF maybe ?

Bump