Jap Box
I have encountered a small problem when doing this but im stumped as to what it can be caused by.
I have wired all of the 6x9's up from the back with the wires going down the drivers side and hidden under the plastic seal.
How their wired from there into a RCA to phono lead adapter coming from the headunit pre-out for rear speakers. This is the adapter in question - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=170525611062&ssPageName=STRK:MEWNX:IT
It has wires for left neg, left pos, right neg, right pos, and then an earth wire :S which I didn't use.
The 6x9's will not power on as it is wired up currently, ive checked all connections and everything is tight and secure, only thing I can see to be causing the problem is the RCA to phono lead.
Would I need to buy a different adapter lead?
Thanks
I have wired all of the 6x9's up from the back with the wires going down the drivers side and hidden under the plastic seal.
How their wired from there into a RCA to phono lead adapter coming from the headunit pre-out for rear speakers. This is the adapter in question - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=170525611062&ssPageName=STRK:MEWNX:IT
It has wires for left neg, left pos, right neg, right pos, and then an earth wire :S which I didn't use.
The 6x9's will not power on as it is wired up currently, ive checked all connections and everything is tight and secure, only thing I can see to be causing the problem is the RCA to phono lead.
Would I need to buy a different adapter lead?
Thanks