Xenons not the same height

[Kitson93]

So I recently got my Xenon's in and working but only when I've been driving I noticed this problem.

There is nothing broken inside them and all the bolts holding the headlight in place, are properly secured.

As you can see from the above that the left light seems to be lower than the right light. Any ideas?
Heres a couple more images showing the difference in height.

 

[bloke]

they need adjusting, allen key fitting on the rear of the light on the inner wing side.

 

[Aston Hamer]

The headlamps need adjusting' on mine there's a metal rod with a hex on the end behind the headlamp near where the bulb goes' this will need tightening at one side or loosening at the other etc. My idea anyway

 

[Kitson93]

Going to try that now! Thanks for getting back so quick!

 

[Kitson93]

Worked a treat! Cheers guys!

 

[Gally]

A lot of people don't realise how easy xenon lamps can be "beam set".

 

[Kitson93]

A lot of people don't realise how easy xenon lamps can be "beam set".

Is that what adjusting them is called or is 'beam set' something different?

 

[Gally]

Well you use a machine. Ie what MOT testers etc use. It's not a big deal aslong as they're level and not pointing to the sky.

 

[Kitson93]

Oh I get it! Think they might need lowered a tad but I'll sort that another time.

 

[Dan@SJM]

I hope you lowered the drivers side one to match the passenger?

 

[Kitson93]

I hope you lowered the drivers side one to match the passenger?

I didn't, I raised the passenger, went for a drive and then figured they're too high. For fixing that today though! Needs done

 

[bloke]

not 100% on this but if you measure from the ground to the middle of the dip beam, mark a line on a wall at that height and then set the beam to line up from 1 metre away from the wall.

(i think it's a metre anyway?)