Zeitronix wideband installed

[16 valver]

Well, Ive finally managed to install my wideband lambda sensor in my valver.

Its the Zeitronix ZT-2 with extra display.

http://www.zeitronix.com/Products/zt2/zt-2kit2-250.jpghttp://www.zeitronix.com/theone4.jpg

At first I didnt know where to put the display as it is a pretty big casing, but when I took out the display I saw that I could just make it fit instead of the temperature display in the clockunit.

It was a pretty painstaking job, but Im very pleased with the result.

Now all I have to do is to get the mapping right, so I can finally drive my valver to its full potential again.

http://www.priyantha.nl/rtc/upload/wideband_display_010.jpg

http://www.priyantha.nl/rtc/upload/wideband_display_002.jpg

http://www.priyantha.nl/rtc/upload/wideband_display_004.jpg

 

[Fred@BTM]

awesome, how much did it cost you all in??

 

[Mike-bham]

very smart

 

[16 valver]

The wideband kit was $399,- and the postage was $40,-.

But than those sh*tters at customs thought it was funny to give me a bill of €86,- for importing.....

So all-in itll be around €500,- which is somewhere around 350 GBP.

 

[Lagerlout]

Thats very cool. And Im sure its useful if you know what your looking at !! lol!

 

[Fred@BTM]

TPS= Throttle postion sensor
EGT= Exhaust Gas Temp
AFR= Air/Fuel Ratio

excellet bit of kit by the look of it, helps you to monitor the engine very accuratley

 

[TriO`]

cool

244,124 miles


[Edited by TriO on 8/18/2005 6:48:06 PM]

thats probably km come to think of it.... but still a lot

 

[Daz]

How cool is that?!

 

[Smokey]

Mint

Yeah its kms fella, 240mph would be a bit optimistic in anything other then a CUP

 

[kiza1986]

I think youll find he was on about the miles the car as actually done smokey, not sure

Kiza

 

[BenR]

very nice!

does it come with a thermocoupling for the EGT aswell?

 

[BenR]

oh, very new install BTW!

 

[TriO`]

Im sure im not the only one... but what the hell does Lambda measure ???

 

[Lagerlout]

ever heard of google? ;-)

http://www.picotech.com/auto/lambda_sensor.htmlhttp://www.picotech.com/auto/lambda_sensor.html

 

[Tom]

fastchip used to do this ace thing like that, slightly different tho.

http://www.fastchip.nlwww.fastchip.nl

 

[Martin]

Look really good....

 

[rmccardal]

Want.

 

[16 valver]

Quote: Originally posted by BenR on 19 August 2005


very nice!

does it come with a thermocoupling for the EGT aswell?

You can order a EGT sensor and connect it to the display.

You can also use the software as a datalogging system when using a laptop.

 

[Christopher]

great display and the best install ive seen.

 

[cat171]

thats looks spot in (looks factory to me)
how many miles is the car on ??
- i have no idea of how to work out kms in to miles !!

 

[jay s]

Quote: Originally posted by cat171 on 19 August 2005

thats looks spot in (looks factory to me)
how many miles is the car on ??
- i have no idea of how to work out kms in to miles !!

u have to get the no in km 244124 then times by 5 1220620 then divide by 8 equals 152577.5 miles. if u want to turn miles in to km swap the 5 and 8

 

[BenR]

or just divide by 1.6!???

So you bought the thermocoupling?

Where did you place it?

Its very nice peice of incar kit.

Which wideband does it use? UEGO? NTK?

 

[jay s]

Quote: Originally posted by BenR on 20 August 2005


or just divide by 1.6!??? alot easier oh well u learn somethin new every day

So you bought the thermocoupling?

Where did you place it?

Its very nice peice of incar kit.

Which wideband does it use? UEGO? NTK?

 

[BenR]

1000m to a km, 1600m to a mile and all lol.

 

[16 valver]

No, I didn get the thermocoupling, but you cant change the EGT reading on the display. The only thing you can change on the display is the TPS reading which you can show boost, TPS or a user input.

The kit includes a simple Bosch wideband which is actually the best choice if you want to use the wideband instead of the standard narrowband sensor.

The car has done 152577 miles, but the engine has done just 9000 miles since its last modifications.

 

[StevieP]

Very tidy install, I wouldnt know what Im looking at though!

 

[jonnyboy]

looks smart, a bit pointless maybe but it looks good!

 

[BenR]

Quote: Originally posted by 16 valver on 20 August 2005


No, I didn get the thermocoupling, but you cant change the EGT reading on the display. The only thing you can change on the display is the TPS reading which you can show boost, TPS or a user input.

The kit includes a simple Bosch wideband which is actually the best choice if you want to use the wideband instead of the standard narrowband sensor.

The car has done 152577 miles, but the engine has done just 9000 miles since its last modifications.

yea, i know, was just wondering if they are using the industry std UEGO sensor.