ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
What have you done to your car today ???
- Thread starter pastieman
- Start date
Sell it, sell it before it f***s you in the bum.
I've sorted the Laguna and arranged for the refurb to happen next week
I've sorted the Laguna and arranged for the refurb to happen next week
Every time something went wrong it was a grand to sort. Just sayin.
172 Ph1
Feeling very pleased with myself - I've managed to change the suspension top mounts and bearings without using a spring compressor or taking the strut off the car.
Clio 1.2 16v
How I did it - I don't know - only kidding , I'll put a post up about it soon , I took lots of pics so you can all see.
Clio 1.2 16v
How I did it - I don't know - only kidding , I'll put a post up about it soon , I took lots of pics so you can all see.
Gave the daily a good wash
welshname
ClioSport Club Member
Fitted a different engine mount I had. Mine was fucked.
Matt e
ClioSport Club Member
Fitted my Koni adjustable rear dampers, my drivers side was starting to leak
Also fitted a tailored boot carpet, so much better than the Renault one
Also fitted a tailored boot carpet, so much better than the Renault one
CrippsCorner
ClioSport Club Member
A250 EbAMG
Fixed the Recaro resistor problem in about 10 seconds... far too easy! 
Bought it
Then drove it for several hours.
Then drove it for several hours.
Fitted my re-configured airbag ecu, turning on the ignition and still having the airbag light come on!!!!!
I give up, one failed MOT coming up
I give up, one failed MOT coming up
Fitted my re-configured airbag ecu, turning on the ignition and still having the airbag light come on!!!!!
I give up, one failed MOT coming up
Have you read the fault codes?
Connecters under the seats?
Replaced the seats for non airbag items and pre-tensioners (To suit the Cup) and re-done and tidied up wiring
Replaced the resistors in the under seat wiring
Side impact sensors are connected
Steering wheel squid is connected
Used a Snap On code reader cleared faults, the only one outstanding was the Airbag Module itself.. Looked up the code said configuration was wrong.
Checked the module and it had been replaced, looked on here for correct module/numbers from a Cup and had it reconfigured
Plugged it in.. Still an AIRBAG LIGHT !!!!!!!
I also noticed recently my indicator does not work going left.. nothing happens.. so maybe the steering wheel squid has given up
'hashtag' upset
Sprinting Clio
ClioSport Club Member
BG FF 182
Mines not just today but in the last week. Only got the car last sunday and I've replaced the exhaust, put new clips on the cv boots, swapped wheels front to rear, replaced the leaking rear shocks. The n/s/r shock had no resistance at all. Washed it twice and done the tracking. All in my lunch break at work last week. Think there is some other stuff but I can't remember
scotiamr2t
ClioSport Club Member
Mazda 2, Ph1 172
removed, brakes, stub axles, rear beam, abs sensors and handbrake cables in prep for fitting all the new powdercoated parts and AST's
Calibre Vintage 17"
welshname
ClioSport Club Member
Gave it a nice layer of Zymol Glasur
Cleaned Monaco by welshname, on Flickr
Monaco Reflection by welshname, on Flickr
Cleaned Monaco by welshname, on Flickr
Monaco Reflection by welshname, on Flickr
imprezaworks
ClioSport Club Member
Mk5 Golf GTI :)
Looks great. That wax is brilliant.
Clio Trophy
Quick pic for the detailers, this is off of the tailgate!
you are meant to wash it 1st :rasp:
welshname
ClioSport Club Member
Zaino Z6 wipe down and a second layer of Zymol Glasur applied. Yummy.
That head work is awesome,
Took the scuttle off, cleaned the drains, shattered my windscreen. Cleaned the engine bay and the car. Replaced the bolt covers on my new alloys until I can get some shiny new bolts.
Cleaned the plasti dip off my old center caps to find they were anthracite (lucky coincidence) and painted the diamonds Albi blue.
old alloys
new
Not shattered
and shattered
very quick clean
Cleaned the plasti dip off my old center caps to find they were anthracite (lucky coincidence) and painted the diamonds Albi blue.
old alloys
new
Not shattered
and shattered
very quick clean
Thank you.. It will be going to BIGASH when done
Ph1 Tom, Phas1er and a few others have my heads and all have got good reviews and big HP hikes with them
PH2 172
Split a coolant hose on the way to work :/ thank god for breakdown cover
Took the scuttle off, cleaned the drains, shattered my windscreen. Cleaned the engine bay and the car. Replaced the bolt covers on my new alloys until I can get some shiny new bolts.
Cleaned the plasti dip off my old center caps to find they were anthracite (lucky coincidence) and painted the diamonds Albi blue.
old alloys
new
Not shattered
and shattered
very quick clean
Stunning wheels, love them! Love the blue bolts too to be honest.
Today, well strictly last night, I replaced my wiper motor as it was going faulty and rarely worked, normally only on the highest setting, and occasionally stopped working leaving the wipers in the middle of the windscreen. Problem solved! I also put the three extra grab handles I got from the breakers in the dishwasher, looking very clean and ready to fit now! Then I'll have one for every seat instead of blanks.
Similar threads
