anybody with an RS2 have their coilbracket break like this?

[bozothenutter]

looks like a fatigue snap, wasn't hitting anything.
any options for a replacement?

 

[cs_dave]

Imagr not working for me

 

[Daz.]

No piccy no wikky!

 

[bozothenutter]

strange, seems to show up fine here...pc aswell as phone

 

[Gus]

Your client does not have permission to get URL /0uFPCM03b836tUL34RKqkEc6qpV0kOqs35IRbIt1okiprw_YAPTJ3jX4TpTKG8fjQw3gkRcAfez6d98=w1920-h854 from this server. (Client IP address: xxxxxxx)

Forbidden That’s all we know.

 

[Gus]

copy it to imgur

 

[bozothenutter]

Tried again

 

[barnesautos]

Mine hasn't as of yet , the bracket looks the same as yours.

 

[bozothenutter]

actually it doesn't...your has three mounting points, is yours a 172?

 

[bozothenutter]

anybody know who makes the bracket that mounts the coildpack on the end of the head?

 

[barnesautos]

actually it doesn't...your has three mounting points, is yours a 172?

Ah I see now , yours only had two points of contact

 

[bozothenutter]

probably why it broke...solid mounts won't have helped..

 

[bloke]

anybody know who makes the bracket that mounts the coildpack on the end of the head?

pms do one.

 

[bozothenutter]

just ordered it, very reasonably priced too!

 

[bloke]

the blanking plate they do for the cam cover is nice as well.

 

[Coops Mk1]

View attachment 186313

Mine hasn't as of yet , the bracket looks the same as yours.

how have you blanked the breather on the breather plate or has the coil pack mount got a seal built in to cover it?

 

[barnesautos]

how have you blanked the breather on the breather plate or has the coil pack mount got a seal built in to cover it?

The small hole which the Ph1's have , all I have done is filled it with solder to seal it .

 

[Coops Mk1]

nah the great big bugger chap that sticks up, the small one I've just peened it with a small hammer to close it

 

[barnesautos]

nah the great big bugger chap that sticks up, the small one I've just peened it with a small hammer to close it

The large one can be left open , because all it goes to is the charcoal canister and mine has been removed .
So nothing goes through there any more .
Probably got spiders [emoji887] in there now [emoji23]

 

[Coops Mk1]

Won't it breathe through it though? Thus spattering engine in oil?

 

[Coops Mk1]

I mean the upright one that goes directly into the inlet on a phase 1 172

 

[Coops Mk1]

That one

 

[cs_dave]

That one

View attachment 186932

It can be left open mate mine was on the cup

 

[barnesautos]

Won't it breathe through it though? Thus spattering engine in oil?

No . The vacuum sucks the oil vapour only via the small hole which is now blocked .
The larger oval that flows into the inlet is only for the charcoal circuit, two mix at that point as the inlet sits over both .

 

[barnesautos]

That one

View attachment 186932

Yes I know you mean that one , you finger is covering the vac take off outlet to the left which goes to the canister [emoji1303]

 

[Coops Mk1]

Ah so it comes in from the inlet from the canister on the left and out into inlet from the home in pointing at, totally isolated from actual breather hole into cam cover. Now I understand