ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Impreza P1. Post pics of your car...

lol, class. No matter how much power you have, its funny how you always want another spin in the smaller cars. I miss my Williams :(
 
Thats fair enough. As you did, if it was a willy i would have stuck with the speedlines..


engine2.gif


It later had a stainless mani and the airbox put back on.
ebay166.gif

love that car!
 
My S14a

Mods include:

Apexi Power FC + FC Commander
Garret GT28 Turbo
S15 Injectors
5Zigen Exhaust
Tomei Headgasket
Tein Coilovers

DSCF1593.webp

DCSF7657.webp


My R32 Skyline (GTS-T) Project Car

Mods:
K&N Airfilter
5Zigen Exhaust
Manual Conversion
Removed Interior
Skyline_1.webp

skyline.webp

Skyline2.webp


Also my boss' Toyota Chaser, 650BHP at rear wheels!!!! its a beast!
DSCF1573.webp

DSCF1570.webp
 
The mods on my car are as follows:

Sti 8 bottom end
Sti 8 Vf 35 Turbo
Sti 8 top mount intercooler (soon to be front mount)
Steel comp. head gaskets
RCM moddified oil and water pump
Sti 5 heads/manifold/fuel system
Fuel pressure reg.
Samco induction hose + Green panel filter (Zero Sports induction on route)
S/S Headers
HKS Downpipe full de-cat
Buddy Club full de-cat
Denso 550 injectors
Apexi Fc + power commander
Apexi Avcr (on order)
Blitz blow off valve

Various guages inc. boost.

Tarox 40 groove discs and mintex pads
Tein HA coilovers and edfc (awaiting fitting)

Apart from all that lot the car is standard. lol
 

Attachments

  • pauls.webp
    pauls.webp
    33.2 KB · Views: 153
  • 50.webp
    50.webp
    36.7 KB · Views: 152
  • 41.webp
    41.webp
    15.2 KB · Views: 167
  • paulsscooby.webp
    paulsscooby.webp
    38.9 KB · Views: 160
Last edited:
heres mine. went through a few phases with body kits. was most happy with the carbon touring car spoilers (came off 1996 works mondeo!)

engine mods:
2litre zetec
watercooled t28 at 1 bar
air to air intercooler
air to water charge cooler
collins dv
2.5'' straight thru zaust
under drive pulleys
strenghtend bottom end
sheepdog fuel pressure reg
omex 600
skyline gts injectors on custom fuel rail
60mm tb
300mm brake conversion
18'' bks and 16'' cossy rims lol
and load more bits i cant member!

heres a few pics,bit or a marmite affect but i wanted to make sumthing different as it was my first car, even used to spit flames!!:evil:
 
Last edited:
Well, since this thread seems to be back, I'll join in...

The 182 & LCR

seat_clio3.webp


seat_clio.webp


The Pug (track day motor)

205front.webp


Image093.webp


Also have a project mini, which looks a bit like this (bought it in 1993, and still not quite finished - really must get cracking!):

Mini2.gif
Mini1.gif
 
My 2 cars

The Crossfire:

PICT0411Medium.webp


And my work/family diesel run around: Alfa 156 2.4JTD:

Alfafront.webp


Both hopefully for sale now in February as im sick having to look after, tax, maintain and clean 2 cars. So im going to buy something with back seats this time round.
 
Hellcat - Nice! What rear splitter is that on the S14a? Are parts cheap in New Zealand?

the bodykit is the Factory Aero Kit as far as i know. Mine is a JDM Spec S14 so it has the SR20DET rather than the KA24 that the aussies get.

the only exterior mods i know of are the tints and the wheels. rims are being changed soon to some RAYS Volk Bronze Items.

Parts in NZ are cheaper than the UK but there are alot more JDM cars about. I get all my parts direct from japan through work. i believe that alot of parts are bought wholesale in japan aswell as my boss has a couple of dealerships in tokyo aswell.
 
my clio sport
cliofront.webp


my 2 door subaru (405bhp/398ft/lbs)
scooby-sti-front.webp


my 4 door subaru (419bhp/372ft/lbs)

CIMG0037.webp

CIMG0035.webp


and a pic of my old school gt turbo back in the day :)

GT_turbo.webp
 
no problem scutch :)

scooby-sti-rear.webp


01.webp


02.webp


front.webp


sorry but thats the only one i have of the GTT unfortunatly :(

Ahh so the 400+ bhp was with NOS? What other engine mods have been done? Is that water injection an aftermarket addition? I know the Type R has it as standard, but I've never seen it installed like that. Have you still got that car? It looks in superb condition, and the blue and white really suit each other. Tip top! :)
 
hello guys :)

the nitrous is to cool the intercooler only(coil on the intercooler), i removed the standard water spray system that the type r has and fitted the nx ntercooler kit.

it also had a water injection system that has a tank in the boot(50/50 waer methenol!)-

watertank.webp


here is the ERL water injection pump-
waterinj.webp


other mods-

TD05/06 hybrid turbo
sti 8 intercooler
ported magnex tubular headers (heat wrapped)
ported H&s up pipe
apexi power fc ecu and boost control mapped by my good friend Andy Forrest :)
740cc nismo injectors
parrellel fuel rail
bosch motorsport fuel pump
raised inlet manifold
revolution 3" de cat exhaust
uprated brakes
uprated suspension
defi's etc etc etc :)

i shudder to think how much i spent on it!!!

i have just sold the car last week as i needed something a little more user friendly (330 ci M sport) :(
 
Last edited:
Lots of nice scoobys on here, I thought Scutch was the only one!

Love the Gti's in black btw WeeMan best colour for them by far.

Here's mine freshly cleaned on Boxing Day, bit boring compared to all the modded cars in the thread but couldn't be happier with it :D ...

Image169.webp


Image171.webp


R32Interior.webp


Image149-1.webp


And some of the old clio :')

Image131.webp


PICT0002.webp
 
Last edited:
That R32 is f*cking mint! :approve: Good stuff.

Jonny, mine is going for remap with Andy later this month, but I've gone down the FMIC route instead of the large STi style. Certainly had some tidy modifications that Scoob, and looked superb too :)
How did you find the Apexi Power? Did you have the controller? Any thoughts?
 
Jonny, mine is going for remap with Andy later this month, but I've gone down the FMIC route instead of the large STi style. Certainly had some tidy modifications that Scoob, and looked superb too :)
How did you find the Apexi Power? Did you have the controller? Any thoughts?

yeah i had the commander, well worth getting as it has a fantastic monitoring system.

knock count (no need for knock link)
water temp
air flow
air temp
boost
all sensor outputs
etc.....

it also records peaks of all of the above

got to say the apexi is a fantastic bit of kit, well worth the money.

what mods do you have???

here is a pic of the commander-
DEFI.gif
 
Last edited:
Jonny, mine is going for remap with Andy later this month, but I've gone down the FMIC route instead of the large STi style. Certainly had some tidy modifications that Scoob, and looked superb too :)
How did you find the Apexi Power? Did you have the controller? Any thoughts?

yeah i had the commander, well worth getting as it has a fantastic monitoring system.

knock count (no need for knock link)
water temp
air flow
air temp
boost
all sensor outputs
etc.....

it also records peaks of all of the above

got to say the apexi is a fantastic bit of kit, well worth the money.

what mods do you have???

At the moment, only Vortex Afterburner exhaust + Magnex Centre, STi filter and Modified Downpipe due to warranty. At the end of the month, it will have FMIC, RCM open neck decat downpipe, K&N/GGR Induction kit, Walbro Uprated Fuel Pump, NGK Spark Plugs or similar, Apexi PFC ECU and Controller (shipped from Japan - £340), remap by Andy Forrest and an AP Racing clutch and release bearing to cope with the increase in power/torque.
The Apexi certainly looks the business.
 
Hellcat - Nice! What rear splitter is that on the S14a? Are parts cheap in New Zealand?

the bodykit is the Factory Aero Kit as far as i know. Mine is a JDM Spec S14 so it has the SR20DET rather than the KA24 that the aussies get.

the only exterior mods i know of are the tints and the wheels. rims are being changed soon to some RAYS Volk Bronze Items.

Parts in NZ are cheaper than the UK but there are alot more JDM cars about. I get all my parts direct from japan through work. i believe that alot of parts are bought wholesale in japan aswell as my boss has a couple of dealerships in tokyo aswell.

Ahh right! Havent really seen a aero kit fitted. Seen 2 JDM spec rears but still looks different? Have you any more pics? Do you go on www.sxoc.com?

White S14a's rule. Shame we didnt get them unless their imports. I regularly bash one out over this -

2006_0810Image0012.webp

2006_0810Image0014.webp


So how much could you get me a S15 BB T28 sent over for then...? ;)
 
Scutch;2346232At the moment said:
sounds good :)

i would stay with the NGK PFR7B plugs mate, i tried all sorts and always went back to the PFR's

what ever you do don't use the hks or denso's, i have seen first hand head damage due to braking up of the electrode insulator!

not good!
 
Page 12 is definitely favourite!:)

Would love to own any of these cars!

Particularly love the R32 and The Subaru! :)
 
Hmm the R32 interior is just second to none, love the flat bottom steering wheel and you sit so low compared to the clio.
 
Back
Top