cutting out on low revs

[r_dizzel*]

PHASE 1 172

if i do not give my 172 enough revs it cuts out...

what can be the problem??

 

[Beef-Mc]

Throttle control spring.

 

[Dm_26]

Your not giving it enough revs hence it stalls?

 

[Aluco]

You could try cleaning your throttle body.

Remove air box elbow and it's the thing bolted to the right side of the main part of the engine.

4 bolts and a electrical plug to remove it - clean with a rag and WD40 as the inside will be gunked up with old oil.

 

[r_dizzel*]

ok thanks... i will try this...

any other suggestions though?

 

[Dm_26]

You could try cleaning your throttle body.

Remove air box elbow and it's the thing bolted to the right side of the main part of the engine.

4 bolts and a electrical plug to remove it - clean with a rag and WD40 as the inside will be gunked up with old oil.

Do you not need a new TB seal when you put it back on or can you use the old one?

 

[Aluco]

Do you not need a new TB seal when you put it back on or can you use the old one?

On a 182 it is an orange rubber O ring that is reusable.
Older models need a new one from Renault.