RS Tuning rolling road day - RESULTS here

[Topgeartom]

Topgeartom - X186 CUJ - ph1 172 - Matched Inlets, Simota, decat, RSTuner map - 161.8bhp 151ftlb

 

[Whiteley]

Whiteley - M42 TUA - 172'd Mk1 Valver - Mongoose/Pipercross, No PAS/AC - 172bhp 162lbft.

 

[Dave..]

Dave88 YF54 DWJ - 177.8 bhp 156 ish lbft - exhaust & decat

 

[Aluco]

Aluco - X178 PEW Ph 1 172 - ITG panel filter. 157.0HP 143lbft

 

[stuart1989]

Stuart1989 - YF54 PXR - 182 Cup - Yozzasport Catback, Samco Ind Bend, KTR Filter - 175.4bhp 155lbft.

 

[kev182cup]

How many threads on this. Lol
175.2hp/155lbft. Standard.
Was gonna ask what ya made dave88 cos I missed yours when I went to maccy ds.

 

[f0xy]

Some good results today, especially gray, mental figure for the mods!

Got quite a lot of the runs on video, just sorting through it now...

 

[Aluco]

Was that you stood with the video cam on the 4 poster ramps Jord ?

 

[Stava]

You didn't get one of a black vts did you Foxy?

 

[theduck]

Some quite varied results there!

 

[kev182cup]

I think the 182's were all pretty consistant with each other and the ph1's were similer to each other aswell although I know a couple who were dissapointed with the power they got with mods.

 

[Whiteley]

Very pleased with mine. The torque mainly, alot more than expected at 162lbft. And 800ish KG

 

[Barron]

makes my 202bhp earlier this year in the RB look very good

some good results by the sounds of it, wish i had gone now

 

[f0xy]

Was that you stood with the video cam on the 4 poster ramps Jord ?

I was there or there abouts...there was another guy with a video camera around too though, stood in a similar place lol.

I had the stripy hoody on

You didn't get one of a black vts did you Foxy?

Think I missed it due to trying ECU's on Whiteleys car

 

[Gaz.]

Gaz. - PE51 UFY - MG ZR 120 (1.8) - BMC DIA without CAF, 52mm Throttle Body, MG TF 135 Camshafts, Janspeed Exhaust Manifold, Janspeed Sports Cat, Janspeed Catback system - 136.9bhp, 130lbft torque at the fly. 111ish BHP at the wheels.

 

[kev182cup]

Very pleased with mine. The torque mainly, alot more than expected at 162lbft. And 800ish KG

And you can say ya have an actual 172. Lol

 

[jenic]

Jenic - SK54 WXN - Standard 182 - 165bhp 148lbft.

Extremely disappointed to say the least, next week the cars getting new oil and filters, new plugs, sort out the tiny exhaust leak, sort out the map with my rstuner and then going to get it back on.

If its still so low the guys at rstuning said my timing could be out from when the belts were changed this year, only half hour labour to check it for me then i can decide whether to get it redone or adjusted.

Any chance of getting a copy of those video clips foxy?

 

[JackoR26]

Custom Catback, KTR Filter, Decat, RSTuner Remap - 165.8

 

[jamie rigby]

jamie rigby - YS51 MYA - fiesta ZS 1.6 - Jenvey throttle bodies, 40mm bodies, 40mm trumpets, 20mm trumpet spacers, Vauxhall c20xe injectors, Omex 600 ECU with rev limit set at 7.8k, Shawspeed SS4 cams, Big valve head, HD Piper valve springs, HD ARP big end bolts, Miltek 4-2-1 manifold, Custom De-Cat, Piper Cat-Back - 140bhp and 123lbs ft., 115bhp atw

 

[f0xy]

Custom Catback, KTR Filter, Decat, RSTuner Remap - 165.8

Does your reg end in *AJ mate?

 

[kev182cup]

Foxy mine was kv05 jxm. Forgot to put it in. Dunno if ya video'd mine though.

 

[JackoR26]

Does your reg end in *AJ mate?

aye thats me mate

 

[f0xy]

Foxy mine was kv05 jxm. Forgot to put it in. Dunno if ya video'd mine though.

Yep its in there

 

[realnumber 1]

realnumber 1 - 172 (CN53***) Powerflow Catback and ITG filter - 162 bhp/141 lb/ft

As i said in the other thread wish I hadn't let it get too hot:dapprove:.

 

[Gray]

Gray - K13 GRY

yozzasport race system, panel filter, AWT matched inlets..

187.4bhp 164lb/ft torque

 

[The Boosh!]

Gray - yozzasport race system, panel filter, AWT matched inlets..

187.4bhp 164lb/ft torque

f**k off!!??

So whats the BHP/Tonne on yours now big lad? Cracking result that is. It felt uber quick when I drove it.

 

[Whiteley]

Still a lardy Mk2

 

[realnumber 1]

Yep its in there

Did you get mine?

Cheers

 

[Gray]

Paul asked me if I was running cams LOL!

 

[ForceIndia]

Gray - K13 GRY

yozzasport race system, panel filter, AWT matched inlets..

187.4bhp 164lb/ft torque

Fuckabout. You at oulton on the RS day?

 

[Jonny1*2]

Paul asked me if I was running cams LOL!

impressive figures those mate. :approve:

 

[Ben_Stevo172]

Im a bit pee'd I couldnt afford to put mine on! Good day but bloody cold! Was good to meet a few members!

 

[chrispy.clio]

Chrispy.clio - V6 airbox, decat, KTR Ultra performance exhaust - 176.3bhp

I had a misfire too which is a bit rubbish, but i'm still kinda happy with it.

I did have the RS Tuner remap, but i'm sure the ECU reset when i disconnected it and left it for a few days.

Anyway ITB's here i come

 

[f0xy]

Did you get mine?

Cheers

Only got through the first few so far, it might be!

Chrispy.clio - V6 airbox, decat, KTR Ultra performance exhaust - 176.3bhp

I had a misfire too which is a bit rubbish, but i'm still kinda happy with it.

I did have the RS Tuner remap, but i'm sure the ECU reset when i disconnected it and left it for a few days.

Anyway ITB's here i come

What torque mate?

 

[chrispy.clio]

It produced 157 Ft/Lb

 

[Gray]

f**kabout. You at oulton on the RS day?

Unfortunatly not.. May pop down though and bring my helmet?!

 

[ForceIndia]

Unfortunatly not.. May pop down though and bring my helmet?!

Welcome to jump in fella.

 

[172Ben]

Are some of the torque figures abit erm, high?

 

[Aluco]

Where's this video then ? Tom ? F0xy ?

 

[f0xy]

Be a bit yet....I aint got no supercomputer