removal of rear seats

[leemckew]

has anyone made up a guide on how to remove the rear seats

 

[DrR]

No because it's so easy?

 

[TimR26]

If they've never been taken out the two bolts for isofix bar will be rusty as they are exposed underneath the car. Soak them in WD40 and leave over night, then you can undo them using a ratchet. When the isofix bar is off there is one torx screw for back seats which again might be rusty.

 

[davebem]

As above its just a couple of bolts, its not a complicated fit.

 

[leemckew]

just that i tried the big bolts and they were solid lol thanks

 

[TimR26]

just that i tried the big bolts and they were solid lol thanks

Yep they're a right b**ch! Wait till you get to the torx screw you'll need an electric screwdriver with a torx bit to get it to budge.

 

[davebem]

A cheap torque wrench will do it, its because they go through the floor and stick out the bottom so are open to the elements, some penetrating oil will do the trick.

 

[Nick172Cup]

Yep they're a right b**ch! Wait till you get to the torx screw you'll need an electric screwdriver with a torx bit to get it to budge.

Why would you need one of them? A torx bit connected to a ratchet is suffice...

 

[Muttley1]

^^^I agree, Just a good old bit of elbow grease and a bit of gurrrr to get them out!

 

[leemckew]

is it not quite hard to get to the torx screw

 

[TimR26]

Why would you need one of them? A torx bit connected to a ratchet is suffice...

That's what Tom needed to get mine out.

 

[leemckew]

^^^I agree, Just a good old bit of elbow grease and a bit of gurrrr to get them out!

yea i should act like a man lol

 

[Muttley1]

I didn't find it a problem, you may need an extension between the torx socket and the ratchet but that's all if I remember correctly! lol..... yeah, man up!!!

 

[BROCKYS_172]

my torx bolt was a b**ch to get out not even a garage could bugde it had to hacksaw the head off then weld a nut to get it off but its done now

 

[Muttley1]

it might be worth loooooooobing it up first with a bit of dismantling liquid?! Could help

 

[leemckew]

iam off ssun and mon so will try it then just want it out and carpets out

 

[Djw John]

Yup!

http://www.cliosport.net/forum//showthread.php?t=158549

 

[leemckew]

it might be worth loooooooobing it up first with a bit of dismantling liquid?! Could help

ya defo dude

 

[leemckew]

Yup!

http://www.cliosport.net/forum//showthread.php?t=158549

your a legend i hunted for that

 

[pritchard182]

couple of bolts then pull