What's new
By:
ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Brigsy's latest activity

  • Brigsy
    Brigsy reacted to MAXRUNDOWN's post in the thread Mondial 172 Cup OEM+ / Rolling Resto with Like Like.
    Fairy difficult checking the stub axle mounting faces relative to eachother without a jig, I've got a couple of laser tools for aligning...
  • Brigsy
    Brigsy reacted to MAXRUNDOWN's post in the thread Mondial 172 Cup OEM+ / Rolling Resto with Like Like.
    The Clio has sat outside collecting dust and cobwebs since I had the alignment checked and found out the axle was pointing in the wrong...
  • Brigsy
    Brigsy replied to the thread 182 crank seal oil leak.
    Use the oem tool mot.991 to install to the correct depth which is slightly proud of the block and use an oem seal. Also check its not...
  • Brigsy
    Brigsy reacted to NorthloopCup's post in the thread 182 crank seal oil leak with Like Like.
    Put a straight edge on the crank where the flywheel bolts up, and you’ll see that the crank seal sits out from the block further at the...
  • Brigsy
    Brigsy reacted to TheBandit's post in the thread The Bandit | Monaco 172 with Like Like.
    CLICK, CLICK, BOOM PAS pump blowed up, what a shocker. Was having a nice day up until then. A picture of it not in pieces or on a...
  • Brigsy
    Brigsy reacted to SKINTasPER's post in the thread Clio 1.2 to 2.0T build 😁 with Like Like.
    Temporary engine till I fit the forged one but yeah !
  • Brigsy
    Brigsy reacted to SKINTasPER's post in the thread Clio 1.2 to 2.0T build 😁 with Like Like.
    New post here but I thought I'd drop my car here and update the post from what I've to do what's next on the list. :-) .
  • Brigsy
    Brigsy reacted to YorkshireKyle's post in the thread 182 Touge/Tuner Build with Like Like.
    Also, your hub will be ovalled to f**k since your balljoint has come loose
  • Brigsy
    Brigsy replied to the thread Paul’s Pearl.
    Mine might be the same, does feel a little numb moving it when going straight. I best start looking for a 200 cup rack. Im sure its...
  • Brigsy
    Brigsy reacted to YorkshireKyle's post in the thread Paul’s Pearl with Like Like.
    The 200 cup came with a different rack, not sure if yours is cup packed Prorl I may have a set of standard 250 pads, pins and rattle...
  • Brigsy
    Brigsy reacted to OssPoop's post in the thread Paul’s Pearl with Like Like.
    Dead spot going straight. It feels like there's a degree either way that doesn't do anything, it's as if there's a coupling that's got...
  • Brigsy
    Brigsy reacted to TheBandit's post in the thread The Bandit | Monaco 172 with Like Like.
    New TRW pads for the rear plus stainless brembo pins to make trackday swaps easier. Rears were starting to seize (probably the rubber...
  • Brigsy
    Brigsy replied to the thread Paul’s Pearl.
    Whats the symptoms of the rack? Dead spot or just vague? My kangoo runs basically the same rack..still on the original diesel one...
  • Brigsy
    Brigsy reacted to JamesBryan's post in the thread The new tool thread with Like Like.
    One of these beasts! GYS Induction Heater. Definitely feels a quality piece of kit and GYS as a brand seems to get good reviews.
  • Brigsy
    Brigsy reacted to Adey.'s post in the thread Rusty old 1968 Renault R8 with Like Like.
    New head is here ready for a strip down, clean up and skim for the 8. I will hopefully get this done in tandem with fitting a sidedraft...
Show older items
Back
Top