BG petrol tank removel ?

marcushookdale · May 16, 2024

Hello Chaps, I'm going to try and drop my petrol tank tomorrow, I've got the BG nearly sripped underneath , ie exhaust / heat sheilds off , Also dropped the rear beam today, I'm giving the BG a bit of TLC that it desperately needs, Also i've got bumbers off, plus wings and sill covers, inside the BG is also stripped, for rear quarter treatment, How easy is it removing the petrol tank , With high pressure fuel lines and s**t ? Is there anything i should know before going at it.....Thanks lads.

Bluebeard · May 16, 2024

What colour is the car mate?

marcushookdale · May 16, 2024

Daniel said:
What colour is the car mate?

I throw that up there , then you lot know i ain't talking about a 1.2 or what ever other car.

marcushookdale · May 16, 2024

I guess it's just crack on then and see what happens, only being one fuel line to unplug..

Robbie Corbett · May 16, 2024

No mate, I think its 4 bolts, two of which you probably had to remove to get access to beam, then fuel lines and tank sender. Carbon canister lines goes to tank or fill tube (i forget) too.

All easy stuff.

Robbie Corbett · May 16, 2024

Harder on other colours though

Brigsy · May 16, 2024

Drain the fuel first or expect a petrol shower.

marcushookdale · May 16, 2024

Thanks Rob. just didn't want to f**k anything up pulling high pressure lines of the fuel sender, i'm guessing it's just a unplug jobby . I want to drop the tank so i can underseal you see, and treat up in the arch / behind the fuel flap, which looks abit sketchy.....Cheers again Rob. good man.

marcushookdale · May 16, 2024

Brigsy said:
Drain the fuel first or expect a petrol shower.

Yeah man.

Robbie Corbett · May 16, 2024

Go for it, I didn't find anything bad under the tank though. Worst was those cavities above the rear spring platforms

marcushookdale · May 16, 2024

Yeah been looking at them today, tbh they don't look to bad to be fair, I'm pretty well chuffed how it's all seems okish under there..Only got one tiny bit of paint bubbling on the drivers side rear arch. I'll check the fuel cap jobby out tomorrow., Brake pipes are goosed so after a beam refresh i'll throw some braided lines on.

Yarp · May 16, 2024

The fuel line just pops off. It’ll throw a bit of fuel out but nowt too serious.

As above, highly recommend doing it with the tank empty. It’s amazing how f**king heavy they are when they have fuel in!

4 bolts to drop it. If the brake lines and the handbrake cables are already out the way it’s easy enough as long as the bolts play ball

marcushookdale · May 16, 2024

Petrol light is on anyhow, it's only got about a tenners worth in it at the mo..so not heavy . Yep handbrake cables came out today , with calipers Nice one Yarp

TheBandit · May 17, 2024

Make sure you get black braided lines so the car doesn't reject them

Krarl · May 17, 2024

I can't say for certain but on my MB it was easy after I dropped the rear beam on my MB

The rear beams differ from colour to colour though

MB

Robbie Corbett · May 17, 2024

Crayola said:
I can't say for certain but on my MB it was easy after I dropped the rear beam on my MB

The rear beams differ from colour to colour though

MB

You probably drank the petrol to make the tank easier to remove.

Krarl · May 17, 2024

Touring_Rob said:
You probably drank the petrol to make the tank easier to remove.

Nah I did it when it was empty and the lawnmower had some v-power

Cut the grass fukin rapid broooo

MB

marcushookdale · May 17, 2024

Well tank can of pretty easy , bar one snapped stud, the biggest shocker was finding a big rotten hole under the arch above the fuel filler, so all chopped out and ready for welding up, the arch was like tin foil, But the outter rear quarter and around the petrol cap area ,is in good nik....So good bases to spot weld too, I'll weld it up in two sections....I'm more than confident i'll sort that..Seem as i spend most of my nights watching Yorkshire Car restoration.Lol, I might even put a little gromet in , so i can cavity wax it after welding, Then underseal over the gromet. And the snapped stud for the petrol tank, i'll just drill and retap the.

Mr Underhill · May 17, 2024

Pictures please

Matt Cup · May 17, 2024

TheBandit said:
Make sure you get BG braided lines so the car doesn't reject them

EFA 😉

marcushookdale · May 17, 2024

Mr Underhill said:
Pictures please

I don't have a phone to take pictues with, i got sick of the mobile about 5/6 yr ago so fucked it off..But i can use my mates phone, I'll get a few tomorrow, but it'll only be showing what i've chopped out and started preppin, It'll take me a good few hours bending and shaping the sheet metal, think it's about 0.9-1mm, But i'll bung more up has i'm going along.

Martin_172 · May 18, 2024

Touring_Rob said:
No mate, I think its 4 bolts, two of which you probably had to remove to get access to beam, then fuel lines and tank sender. Carbon canister lines goes to tank or fill tube (i forget) too.

All easy stuff.

Incorrect, its 4 bolts on a RB, LY, PB - The others only have 1 bolt.

marcushookdale · May 20, 2024

Rot cut out, and a bit of red primer slapped on , Iv'e managed to get on section welding in on sunday afternoon, Then fucked it off coz all mi mates were sat at the pub , plus it was to fecking hot stuck under that wheel arch. I'll do abit more on it this week.

marcushookdale · May 20, 2024

Should be back on all 4's in the next few week , just got a holiday to get out the way , then throw some pound notes at it.

marcushookdale · Jul 14, 2024

Well that wasn't a quick fix with the welding and sorting the wheel arch out, Then to find the box section for the rear beam was pretty shot, So cut the out , And sorted that , then to find another hole on the rear back leg, Sorted that........Then found a biggish hole in the front box section ,A little bit more prep , then ready for seam sealer, & underseal the job lot. Rear beam bolts are goosed , then parts shopping

marcushookdale · Aug 27, 2024

Finally ....that took some sorting out, just the front arches to sort now, but all the box sections are wax oiled . I must of thrown nearly 3k at the BG , and still not finished.

marcushookdale · Aug 27, 2024

Piece of s**t laptop , i can't use this feckinh laptop of my gf, ff, i stick the pici's up from my lapy soon, the stupid b**ch for having a laptop that i don't know how to use , lol,All back end looking totally new & fresh.

marcushookdale · Aug 27, 2024

Bingo...

marcushookdale · Aug 27, 2024

Not the best pici's lads but you sort of get my drift.....i've spent weeks & weeks under the BG cleaning , preping , welding, seam sealing & using the shultz gun, the most thing i'm pretty pleased about is repairing the inners of the petrol flap, seen as it was rotten as f**k and was nearly falling off..I'll try and get a few before pici's up soonish .

marcushookdale · Aug 27, 2024

that's all the rotten shite i cut out and replaced with fresh stuff...

Search

Search

BG petrol tank removel ?

marcushookdale

Bluebeard

marcushookdale

marcushookdale

Robbie Corbett

Robbie Corbett

Brigsy

marcushookdale

marcushookdale

Robbie Corbett

marcushookdale

Yarp

marcushookdale

TheBandit

Krarl

Robbie Corbett

Krarl

marcushookdale

Mr Underhill

Matt Cup

marcushookdale

Martin_172

marcushookdale

Attachments

marcushookdale

Attachments

marcushookdale

Attachments

marcushookdale

Attachments

marcushookdale

marcushookdale

Attachments

marcushookdale

marcushookdale

Attachments

Similar threads