Ph1 side skirt mounting points

gudger12345 · Wednesday at 8:45 PM

Hello all,
Does anyone have the dimension for where the side skirt plastic are mounted to the sill. Pot rivet hole locations ideally.
I have had new sills fitted to my ph1, i took measurements of the distance between each hole on the original sills but didn't take note of how high up the sill they were mounted/ drilled.
Also if anyone has a link to the rivets that would be great.
Thanks

Jaeclio · Thursday at 4:20 AM

Hey Gudger

Is it just the height of the rivet holes on the sill you're after? Cars in the bodyshop atm, but happily measure them up when it's back this weekend if no1 else comes through for you before hand mate

gudger12345 · Thursday at 6:55 AM

Jaeclio said:
Hey Gudger

Is it just the height of the rivet holes on the sill you're after? Cars in the bodyshop atm, but happily measure them up when it's back this weekend if no1 else comes through for you before hand mate

That would be amazing.
I need the height of each hole and the location of each hole please
Thanks i really appreciate it.

Jaeclio · Thursday at 9:36 PM

gudger12345 said:
That would be amazing.
I need the height of each hole and the location of each hole please
Thanks i really appreciate it.

It's on my list of things to do this weekend brother, report back soon

Louis · Friday at 10:27 AM

Put m5 rivnuts in whilst you're there IMHO

gudger12345 · Friday at 11:03 AM

Louis said:
Put m5 rivnuts in whilst you're there IMHO

That was the plan mate
just want to get it right first time before i cavity wax the rear.

Mr Underhill · Friday at 12:56 PM

gudger12345 said:
Also if anyone has a link to the rivets that would be great.

Rivet info (RIVET G48 x 16 ALU) - Part number 7703072047

https://www.accu.co.uk/blind-dome-rivets/646674-HRD-4-8-16-AZ?

Jaeclio · 2024-11-24T05:08:48+0000

Hey @gudger12345, got these this weekend.. whilst doing it it dawned on my that you might be after the brackets that sit above the sill.. in which case, I can still get for you but will be a few weeks when I pull mine off - sorry!

Couldn't see any holes in the sill on the picture you posted above so proceeded to get these anyway!

The height of the first and last rivet hole were up 1.5cm up from the bottom of the sill, the middle 3 holes were up 1 cm.. and the bottom of the sill and sideskirt itself were basically flush on those middle 3.