Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
RCK (Roll Centre Kit)
I use the NorthloopCup (Bridgecraft Motorsport) hubs on my car which widens the front track by 5mm per side anyway. If you want good handling, id ditch the 16mm spacers for a start, my car drove awful on them.
Depends. I'm running RCK hubs which bring the front s out 5mm, so a further 5mm spacer makes 10mm overall and 20mm increase in front track. So yes its can be worth it. All depends on what you're looking to achieve.
I don’t know for sure mate. I only have Cup hubs so can only go from what I’ve measured on my own car.
A lot of this is outlined on the PMS website too.
A Speedline 2118 for example had only a 2mm rear chamfer so can be run with a 10mm slip on spacer without issue.
The OEM cup hub nose protrudes 14mm so you physically can’t fit anything less than that in a hubcentric fitment. This is why most you see start at 16mm to allow some clearance.
You won’t be able to run 10mm slip on spacers with the Turinis. 10mm on the hubs leaves only 4mm of the hub nose protruding for the centre of the wheel to locate on.
The Turinis have a 6mm chamfer on the rear which leaves you 2mm short. For this reason you should only run a maximum of a 5mm...
Its a captive stud and nut as per OEM. The stud sheared off like yours has. Drill what’s left of the stud out and fit a riv nut, and then add an M6 bolt mate.
Not necessarily. Some people might only ever aspire to own a V6 Clio, so not just collectors they would appeal to. Only recently have they seen a sharp rise is values, it wasn’t that long ago that you couldn’t give one away. Lol
Similarly an Escort Cossie, looks cool but absolutely bloody awful...
My cars my daily driver so does about 250-300miles a week in all weathers Inc all this salty shite. I clean the car once/twice a week time dependant and use one of the eBay specials for the underside. Put the rear up on a Jack and snow lance underneath and a wash down.
it’s not a thorough job as...
Brilliant watch, even more so if you grew up watching the film.
For me this was THE very car that manifested my love of cars back in the 80's, and i've probably watched the film over 100 times. I think i wore the VHS out!
As a film by plot and acting standards its proper low rent. However...
The ones being sold by dealers today with the pins/self adhesive are different to the original. The underscore in the original has a groove in it and the ones on sale today do not. I've never found an original for sale in recent years so check carefully what you buy. :)
I’ve seen he’s been using the RPX. I don’t know the fella but it’s came up in a YouTube search. Historically EBC pads are junk, but these are supposed to be quite something. They’re reported to be quite different to many other pads out there, not that I think EBC have reinvented fire or...