Search results

@JP83 , I’ve not seen or read anything anywhere else . How come no more ?

This is the Ph1 wiring plug , so I’m guessing you need to know what does what ? I’ll see if I can find some generic diagrams to come up with some info .

Here you go Amin @hsustyle

I’ll be up for it again as I have my bodies on now and need a good roasting

That cover looks very nice Gary [emoji1303]

Sweet little purchase that

Find the easiest point to disconnect the fuel line , find the fuel pump relay and bridge the contacts . Voilà continues fuel pumping into your jerry can .

I’m also on the Me221 , can confirm the aftersales side is deff good , I posted on the FB page and had answers from admins within a few hours along with other users not necessarily Clio users to boot. It’s growing for sure . Just having mine mapped on ITB’s . Looking forward to the results .

You talking about the matrix ? If you don’t want it , bypass it with a u-bend pipe within the engine bay

Very , very nice [emoji1303] indeed

You need to check wires from the CTS to the ecu . Seems to me that the ecu isn’t getting the info . That said - it’s detecting you pulling off the connector and activating the fail safe . Make sure you’ve checked that the replacement CTS has the 3 pins to match the 3 wires , I’ve seen people...

That’s Mega , looks absolutely mega . Is it a GrpN shell ? C57 what ?

I haven’t no , not seen the ecu before . Similar money to Omex as well .

Did your ecu and UCH and key fix your problem ?

I’m running an ME221 setup , uses the OE loom , not really what your looking for as your having loom issues . The omex ecu’s & looms that I’ve fitted in the past , I’ve done omex ecu spliced in to OE loom and I’ve done Race Loom fitment also , and obviously the race loom is far easier to work...

I understand you’ve only cut from the aircon ecu to the big plug and UCH , and from the abs harness to the white plug , is that correct @pule333

Fuse 6 & 37 all ok ? Also pin 8 UCH - Pin 4 On ring of key reader . 12v @pin 3 of key reader Earth @pin 2 Fuse 28 feeds the key reader Also pin 9 & 10 is can high and low also . Don’t have a destination for those two @pule333

Glad you had an enjoyable first track day experience , you going to love cadwell , my first time and it was epic . Sneaky little link to my day [emoji1303] Pics

@pule333 Check pin 27 and 57 from the engine ecu back through the white engine bay plug and the bulkhead harness and through to pin 19 and 20 on the UCH . Make sure none of the pins are bent in the bulkhead connector . Also it’s known the loom can break above the gearbox where it sits . Also...

Very nice example Gareth . Following ??

@Yanoo , are any of the kits still available please ?

I see you got something strong [emoji1320] then .

No paste needed at all . The springs pull it and it’ll settle in no bother

Only think there is 2 available 110a being the highest. Have you looked into power caps. Voltage storage for the stereo system . I’m no guru by the way.

Red is 12v perm Yellow is 12v switch

Check all your fuses are ok again . I mean with a test lamp so you can see the power is flowing through the fuse .

Rather than me making a new thread , here’s my findings with regards to the cables . I’ve read first line ones are pretty good fitment . So on that note I took the punt and ordered both today . Let’s see what turns up tomorrow. Feel free to use my findings , I hope it helps everyone out for...

I got these one's lads , not fitted yet but at that price cant be that bad lol http://www.ebay.co.uk/itm/RENAULT-Clio-MK2-air-center-grill-air-ventilation-grill-left-right-side/132455146458?hash=item1ed6f123da:g:U4cAAOSw7PJZZUbm

Those 14” wheels are off a Clio RSI . Have a look here on Renault Uk FB page