Search results

Anyone had their clio ITB'd from Andy? Are they worth the money as opposed to a turbo? And what's the real world power differences and feels? Both in gear and setting off etc? Any regrets or bad points? Was wanting to turbo but think a bit less power might be better thus less strain on...

Right, Basically my Cat is knackered at the joints and i arent welding or f**king with it, i Just need a new Cat. Sports cat appears the way to go, and i'm definitely not going decatted for legal reasons etc. I have currently a Scorpion Rs192 system with a newly added non resonated mid pipe...

Right, got above exhuast on my 182. Standard cat, Standard RS192 system. Thing is, it's a little quiet and I was wondering without decatting, how much louder I could make it? And how would I?

Right. What's the deal with these things? What do they actually do and what's their intended function? Do they really work? Which is the best one to go for and what's the best place to get them from? Does anyone run them in a daily and any stories of success from these? Do the mobile camera...

How far out would you say a 55 plate clio 182 would be on the speedo to actual speed? The reason I ask is if I go through the "your speed is" signs an indicated 32-33 on the speedo is only shown on the "your speed is" sign as 30 mph. I just wondered if this was because the signs were out or...

182. Just changed the Dogbone mount. I hasten to say there was absolutely nothing whatsoever up with the old one, thus no underlying symptoms... I took it to a garage and for whatever reason they could only get the big bush in. I was driving the car and had it in reverse, and was backing up...

http://pages.ebay.com/link/?nav=item.view&id=331505804150&alt=web

Took car to well trusted garage. They could only get the big powerflex purple bush in apparently the other one was way too big. Comes with 2 washers that also haven't been used. The car does now vibrate quite a bit more and the gear changes are definitely more positive. The revs seem to not...

Got a 182 FF. Going to be putting some 20mm spacers on tomorrow, the car runs cooksports. The spacers are Hubcentric H&R Trak 20mm. Just wondering what torque to fit the spacer onto the car and what torque to fit the wheel to the spacer? Am I also right in thinking the clio has wheel studs...

She idles here, Seems to pull fairly well from low down but get a very noticeable 5k still. 182 if that makes a difference.

Just wondering how much it'd be to change gearbox oil in a 182, be done at a specialist just have no clue how much. Also, what will this really do for me, cars on 74k never been done I don't think, there's so many bloody receipts to look through lol. Also, how much is a replacement oem clutch...

High pitched whistling noise at higher revs?

Right. We all know the 182 sound system is stuck back in 2005. I went out in a friends audi with the bang and olufsen option ticked and f**k me it did sound unreal. It got me thinking. Can the clio be upgraded to this standard and has it been done? How much would it set me back and what...

There is a phone number ... http://pages.ebay.com/link/?nav=item.view&id=321661134724&alt=web

How do i change the rear indicator bulbs? Do I have to remove the torx screws holding the plastic panel in place and then unscrew the screw on the headlight and then remove the carpet?

Right, had a thread up but want to get some spacers now. Think to be safe i'm gonna go 15mm on the front and 10mm on the rear? This shouldnt cause rubbing should it? The car is a 55 plate 182 FF on Cooksport springs. More importantly, i want good hubcentric ones. Where abouts should i get...

Right. I aren't a 'street racer' and neither is my dad to start. I have a 182, mild generic mods, exhuast induction lowered etc. My dad has a mazda 231 rx8, lowered and exhaust. Few quesitons. Which, in a straight line, down a drag strip is quicker? I can't find any evidence. There are...

Outside M & P birstall!

My climate control panel has two slightly worn buttons, Auto and Off i believe. How easy is it to change the buttons onto mine if i buy a cheap non working panel with good buttons? Not bothered about removing the unit etc I can do that, just the buttons. Oh and if anyone has any mint...

Colour coding my car (slowly). How the hell, and please be very detailed, do I remove the silver bit behind the plastic screen that encases your speedo and tach? Want to put a carbon one in rather than silver. I've had a search and checked the guides but can't find much. Is it a hard job? And...

Just took a shitty aftermarket radio out of my car and reinstalled the standard unit. All works fine. Asked for my code, which i gladly entered from an original bill of sale. Took it and everything works as it should. I turn the car off and on and it wants the code everytime. HELP! Car is a 182...

Right. Got DDC doing my belts soon but would spend a bit more with them whilst I'm up there. Cars currently got a scorpion rs192 ktec induction and cooksports. Happy with this lot but what can I do in terms of making the car feel a bit quicker or drive a little different? Don't want to spend a...

http://pages.ebay.com/link/?nav=item.view&id=161556443953&globalID=EBAY-GB&alt=web

Hi, would it be possible to have a meet maybe york selby way on or more around here? I always want to to to the meets but they're always miles away XD if not no worries :) there's a lot of members around here though I'm sure would love to go!

Ebay item number - 111571855844 Thought someone would perhaps be interested in the detailing section.

Cannot find an answer to this although I'm sure there is one somewhere. How the hell do I get the front and rear renault diamonds off? Please be as descriptive as possible because I don't want to f**k it up and have 100% zero ideas on where to even start.

Put this in wrong section http://www.cliosport.net/index.php?threads/766326

Right. My dad's just bought a new motor and it needs a proper clean. This stain is on the headlining and the car stinks of smoke. I was wondering if this was smoke or oil or something and how the hell to remove it. I don't have a wet vac, is this the only way? And how. Basic as possible. I'm...

I want to put some GOOD quality spacers on my 182 ff. It has cup dampers and cooksport suspension. I do occasionally have a full car. I want the wheel to come as far out to the arches as possible without obviously looking odd. I would like to know which spacers to buy, (hubcentric) for front...

Car is a 55 plate 182 My cambelt is due, through being 5 years in may of this year. The car's done about 30k on the belt, and it was done properly by a specialist. Would you change it early? No dephaser noise, aux belt done on chec. Just wondered whether I should get it done early as a...