Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
It's a version 3, 1 Ohm dual voice coil, so handy if you have a powerful 2ohm amp.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=130181278694
2500w RMS @ 2ohm. Starting at £100. Good condition.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=130180664679&ssPageName=STRK:MESE:IT&ih=003
Chrome effect handles to smarten up your interior. they have a few scratches and theres a small chip on the passenger side surround. Quite expensive from Renault (what else is new)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=130176231199&ssPageName=STRK:MESE:IT&ih=003
In great condition, was fitted to my GT Turbo engine, shifts a lot of air, slimline for tight applications. Ideal for project and kit cars or just as an upgrade for better cooling.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=130175901249&ssPageName=STRK:MESE:IT&ih=003
Has a few nics to the bottom edge of the metal but no major marks, has a button adaptor to fit a mk1 but you can buy these from Demon Tweeks i think to fit other cars.
was fitted to a 16v but seen the same part no. listed for the 5 gt turbo and the megane. Starting at £50
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130176221917
Sorry if this a repost but check out this Fiat (126?) total madness
http://www.vauxcav.co.uk/videos/Mad%20Fiat.wmvhttp://www.vauxcav.co.uk/videos/Mad%20Fiat.wmv
After indicating left at a turn it cancelled itself as usual. Then i noticed the right indicator was flashing. I suspected the hazzard switch as its a bit tempramental. I pushed the switch to hold it in the off position, the indicator went off. Driving whilst holding the switch wasnt easy so I...
Ive spent a good few 000 quid on my car with a GTT engine conversion, bodykit and respray and Im a little concerned my current Cat 1 doesnt provide enough protection/deterrant from theives. Is it worth spending nearly £700 on a Clifford 950 together with a pager system and Cliffnet wizard? Is...
I have a Viper D2500.1 amp and am looking for new sub that can take the power. I dont really want to run 2 subs to try and keep the weight down. I listen to all kinds of music so it needs to be a good all round performer. Also it would ideally be able to perform in as small an enclosure as I can...
Got a major problem on my hands, Clio GTT is nearly finished so its insurance time again. Ive rang 3 companies, not a lot I know, but I was expecting the best quote from one of those three, and to be honest I dont expect any of the big isurers like Tesco, CIS etc to insure a clio GTT.
HIC...
Im after a good price on a Clifford 850 with a few extras fitted in the Essex area. Has anyone used the above company, or can they recommend any other Clifford installers in the area?
Im getting a Viper d2500.1 next week so im looking to make a change in the sub department. Ive got a Kicker L7 12" solobaric at the moment, but was looking to change to 2 x 10" subs instead. Im looking for some decent SQ and have a budget of £600-700, but if I can spend a few £s less all the better.
Im looking to upgrade my alarm to one of the new G5 Clifford units, so im looking for a good installer as close as possible to Liverpool or somewhere with reasonable prices that will fit it at home. Has anybody got a G5, is it worth the cash? Im looking to get the Intelliguard 850.
Not sure which ones to go for, and what amp should i run them with? I also need advice on what sub to go for, ive just bought a RF 1500bd to run my 12" L7 Solobaric, i find the SQ isnt too great on it. I was looking at the JL High Output enclosures, are they worht the cash?
I want to go for something different sub wise, and always dismissed VIBE due to price. But are their enclosures worth it? I was looking at the 10" AC twin, Do they need a lot of power for a good result, if so i might just get a single AC.
Offer is on for 21 days only, 1 farad, gold termianls, dispaly and bracket - bargain - £50 (half price)
http://www.maplin.co.uk/default.asp?CartID=391586&targetmodule=25446http://www.maplin.co.uk/default.asp?CartID=391586&targetmodule=25446
I know theres a couple of people whove done it, but is there a guide on here? I seen to remember something about using the rear seat covers on the existing cushions? What do you do with the fronts, drill the bolts on the 172 subframe?
On the way back to work from my dinner, i was slowing down for a roundabout, gears felt a bit notchy, i went round and got to the other side in neutral and couldnt get it into any gear. It wasnt a matter of itd crunch into gear, it just wasnt going in at all. The clutch pedal was fully down, no...
Ive got a few questions i hope i can get answers for. Firstly where have people had the conversion done. What state of tune is your GTT engine in, anyone got a 200bhp+ one? How is it cooled, anyone got a big front mounted intercooler, any problems with overheating. How have you found reliabilty...
Heres my just tinted lexus clusters. They look a bit dark blue, but they blend in more with the car.
http://coolspot.pwp.blueyonder.co.uk/lexus1.jpg
And after
http://coolspot.pwp.blueyonder.co.uk/tints1.jpg
Will do a better pic in morning.
I think the guy is still looking for another 10 people AT LEAST before he puts the order in so if youre interested and havent emailed him so far please do so.
http://homepages.shu.ac.uk/~cjadams3/REVERSEGAUGESnu.jpg
still £99
Email mailto:info@neoquip.com">info@neoquip.com
and put clio...
Not the best pic in the world but i had to be quick as the batteries were going. What do you think? Will post a better pic tomorrow hopefully.
http://coolspot.pwp.blueyonder.co.uk/lexus1.jpg
Hope so as im going to try and shoehorn it in tomorrow, does it fit? Is it safe to use it. I just thought 550 amps would be better than the 400 offering for the 16v at halfords.
Right i just need to know something about the front shocks. Do the top mounts sit high? is there a nut between the strut itself and the top mount? What is the correct mount for use on a ph2 16v? (mine currently has a Nylock nut as part of the mount.
I need the info ASAP as i cant pass my MOT...