Search results

Don't go too much though or you'll have problems tensioning the belt correctly, with the oem tensioner anyway. 197 pistons will give you a bit more.

They only hold the disc in place for when you take the wheels off.

Can do yeah.

Should get away with running 10mm, best to check though.

Getting on for 250bhp per tonne.

Mine is 180bhp 160ftlbs standard.

There needs to be some of the hub left showing for the wheel to locate on. If not you'd need hubcentric spacers which start at about 15mm.

Weird that. How much camber are you running?

Looking good Neil. Glad to see the rivets worked for you.

197/200's don't seem to be as weak.

He will break it within 5 minutes on track ?

Just make sure you run the drill in reverse too ? Seen people try to run them clockwise before.

Stick RS3 running gear in it ?

Baby M's look shite on track IMO, not involving at all.

Get that drill out boy haha. Did two on my brother's Meg 250 calipers (which are the same size bleed nipple i think M10x1.0) Didn't have any left hand drill bits, but if you do it'll be so easy. Think i went up to an 8mm bit and that thinned the sidewall of the nipple out enough that it...

Just realised i never posted the link ? https://www.demon-tweeks.com/uk/goodridge-speed-bleeder-243452/

Why do they rub on the coilovers? My tyres were close to my H&R's with ET43 2118's but they never touched. I did run a 5mm spacer just in case though. That was with -2deg camber with camber bolts.

Yeah i siliconed mine up too. Worth checking the connector on the back of the lights too.

Under the carpet/plastic trim. If you follow the rear lights down you'll see a black wire bolted to the body on both sides. Those black bungs either side of the lights where to boot shuts against like to leak water too which finds its way to the earths.

8200671286 That's the part number for the actual pressure sensor.

Earth/connection on rear lights need cleaning up.

f**k paying £125! Get these Goodridge ones instead for £12 each.

Who? ?

Saw this on FB last night. Mega peak power. I see Carl's unit is looking tidy.

8KG all round is a good setup.

Well you would have done..... Because they were still available then ?

Fuel injector.

5mm per side. 28mm vs 33mm.

@Filters might know somewhere.

Alex at AW Motorworks could be your guy to sort it. https://www.facebook.com/AWMotorworks/