Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Guys,
Looks like I'm missing a wire that connects into the steering wheels to connect the horn up.
i currently have a wire with a red plastic tubular piece of plastic, but looks like I'm missing a clip perhaps on the end?
Was on a OMP steering wheel so cannot work out what I'm missing.
Pluged...
Seen a lot of posts around saying just but a new shaft - I've got the boot I need for £7.98 delivered - are they really that much of a ball ache to fit?
I've fit boots in the past with not too much faffing around?
any pointers as not done it on a clio before?
Rs 172 if anyone wants to know.
Nice one thanks mate - I've scanned it and it brought up no codes so slightly annoying. I'll check all the connectors to the airbag but they looked fine and clipped in nicely.
Guys,
I've just replaced an OMP steering wheel with an original clio rs one.
Couple of questions, the horn wire seems to be completely different from the connector on the wheel, and also after fitting the airbag light is now on, when it wasn't before and the SERV light is also on.
could be a...
Ah right ok think I may have missed the metal part. Take it that's at the bottom of the caliper, the part which has a little metal clip on it?
Brakes don't look like they've been touch in near 30k miles as they're in pretty bad shape, so everything looks the same!
Evening guys,
Changing the rear pads on the 172 and run into a few problems.
First off I can not for the life of my release the pads from the caliper, I've pushed and wound the caliper back as much as I can but it doesn't seem I be moving back any further.
Any ideas or tips?
Evening guys,
what does everyone use to dewiper the rear? I noticed it's got that horrible cut out in the window so it's not a simple rubber bung job...?
I've just brought some of the stuff from ECP, says it's safe with dextrin II & III so thought why not... Ill feedback my findings and couldn't find any dextron fluid
Could it be anything to so with power output on the battery though? Or would it be the aux, it just seems to be lacking electricity so got to be one of them.
Try a pressure bleeder, with my old gti golf I needed a pressure bleeder because it wouldn't work bleeding them normally. Also, on my golf I needed to bleed the clutch slave too? Not to sure how it works on these clios.
Could this be battery related? The electric windows take forever to go up, and if I use a few electrics at once it feels as is the windows are just going to stop.
Ill carry out a battery test tomorrow, but could this bring the aux belt to squeal with lack of power?
Only happens when on full lock though?
Anyway to tighten it? It's at 86k miles and looks like was last changes about 15-20k miles ago. Heard they're a nightmare if they snap?
Alright guys,
Fresh in at the Renaultsport scene after being out of it for a LONG time.
I've got a 172 ph2 and when the steering is on full lock it makes a good awful squealing noise.
Any ideas?
Power steering pump, aux belt or timing?
Tah!
Hello everyone!
Been a fair few years since I've been on this forum!
Just purchased a lovely little 2002 51 plate Renaultsport Clio 172 ph2.
86k miles and belts done last year. Little service history and needs some TLC on bodywork and some engine love as it's filthy!
Sitting in that...
I just brought a sset of lexus lights for my mk1 clio but they havnt come with the light board adapter as they dont just slot in, brought them of fleabay, anyone know where i can get the new light board?
Cheers, Luke
Hi guys, I want to put the 2.0 lump in my clio, any ideas where i could possibly get the williams engine? its a 97 mk 1 ph 3 i think!
Sorry if it in the wrong forum :) :)
This bloody immobiliser has been doin my nut for a week now.
Problem: Immobiliser not working, key wont unlock the door or immobilise the car.
Things done:
New chip board that is normally next to the light on the roof dash (infra-red blip thing)
Realised that there was a metal connection...
Right well one of the black infra-red recievers is broken on the chip board of the immobiliser.
Is there somewhere where i can get a replacement chip board? from like a reanult dealer or somthing?
Anyone know?
Cheers,
Luke