Search results

Does anyone know where I can get one for my 2003 1.6 16v? Have seen one somewhere before, silver alloy with engraved Renault logo on top, but can't remeber ho made it or who was selling it. I have a new engine cover on the way and want something nice to sit next to it rather than the crappy...

I a looking to buy some OZ alloys, either Super Ts or Ultra Leggys. My current wheels are 15x6j renaults with et43 The OZs are 16x7j with et37. By my calculation this means the following: Outside edge of the wheel will be 18.2mm further out than with the regular alloys. Inside edge...

My 1.6 16v is sat on 34,450 miles at the moment, and turned 4 yrs old just before Christmas. So technically it's due its 36k/4 yr service. I was thinking of getting this done in the next weeks or so and just wanted to check a cuple of things. Does the price of the servicing include the...

Does anyone else have this problem? When i use my wipers and washer jets, the wiper blades fire s**t loads of water onto the passenger side window leaving it streaky and dirty, also the top right hand corner of the windscreen gets the same treatment, along with the obviously unswept area in the...

Since i got my car in May of this year I was washing it religiously evry week using the follwing method: Rinse using a hose 2 bucket method using lambswool mitt and AG Bodywork Sampoo conditioner Rinse down with clean water Dried using Megs water magnet drying towel 2 x coats of AG SRP 2 x...

Had my first scare today. Overcooked it going over a roundabout near me and experienced major understeer, ws heading straight for the pavement instead of round the roundabout. Could hear the tyres screeching, wound on some more turn on the wheel and eased off the accelerator, suddenly...

Is it ok to buy some engine coolant from halfords and top up the level? Just i had a look at it and it said on the bottle to drain and flush the system first, as using mixed manufacturers coolant isnt advisable. Do i have to flush the system? or can i just whack some in?

http://cars.uk.msn.com/news/car_news_article.aspx?cp-documentid=6747846

HI Just got Adobe photoshop cs3, never used photoshop before and was shocked at how difficult it is to do basic things. Anyone know of any free online tutorials for it? Want to be able to do things like make the car look lower on its suspension, fit different wheels etc. I don't have any...

I had a problem with my rear wiper jet not working. Took the spoiler off to find the tubing isnt long enough to reach the nozzle. Does anyone know if this final length that comes out of the bootlid can be replaced, and if so how to do it and how much it will cost. Help appreciated. Also...

Was out for a drive, pulled out of a junction and moticed the car struggling in second gear, then it struggled in third, fourth, and fifth. Basically the car struggles a bit in all the gears, my toxic fume monitoring light has started flashing, and when i got home i walked around the car with...

Just been on and checked my car and it says their has been a plate change on it. Any ideas why this might be. It doesnt have a personal reg or anything, and i am the 3rd owner since 2003.

Had noticed my rear washer jet didnt seem to be squirting the water but was more of a dribble. So in preperation of 1000miles driving this weekend, i thought i would investigate. So in a spare half an hour, i whipped the spoiler off to discover the hose wasnt even connected! The reason, it...

When you slide the spacer onto the hub, do you find the spacer fits absolutely flush against the mounting face for the wheel? Mine seems to have a gap of about 3-4mm between the spacer and the hub. If anyone has pics of theres without the wheels fitted it would be much appreciated. I have...

Here is a question I have concerning changing the wheels on my clio. My current dynamique alloys are 4x100, et43, 15 x 6j Now, if i wass to fit some 16" alloys with the same offset, but which were 7j width, would i need spacers as I would think the wheel would be 0.5" wider to each side of...

Well, a few days ago i decided i wanted to paint the silver surround of my head unit black so it didnt stand out so much to people and indictae i had an aftermarket hu. Whilst looking, I thought to myself, mmm, the dash insert strips are a bit scratched (been like that since i got the car) so...

Title says it all really. This type of bumper:

Am looking at getting a new set of wheels but I don't know much about different manufacturers. Are Fox alloys any good...

Has anyone else changed their wheels on a Dynamique with this offset? Really wanted some Ultraleggras but can only find them in et37. Will these be ok? Or OZ Superturismos in et42. My car is lowered 30mm on Eibach Pros. P.S. I dont want to go to something with a larger offset as i don't...

Fitted my new number plates today, went for adhesive velcro to allow for easier changes. What I want to know is, has anyone had problems with the front number plate due to the curvature of the front bumper? Basically because the bumper curves the number plate is wanting to spring back off at...

I originally posted pics of my car a while ago when i first bought it. Since then I have carried out some subtle mods which have made a nice difference without changing the original car too drastically. Just home from the garage after collecting the car: RS Grill fitted, nice easy job...

My Eibach Pros suspension arrived today. :) Should be getting it fitted in the next week or so, then my 172 alloys. Pics will be posted after.

I have a 2003 Cyclone blue 1.6 dynamique. Was gonna colour code it but am not sure now as i think the black breakd up the blue a bit. For some reason last night (when i got back from the pub!) I had the thought of having the bump strips, spoiler and handles painted gloss black. Anyone got...

Hope this is the correct thread, as dont want any points on my license ;) Just wondered what people keep in theor boot in the way of toolkits etc. I have the spare wheel tool tray thing but what in addition to this should i have with me?

Before anyone tells me to do a search, I have done but the info is so conflicting I am looking for a definitive answer from someone who has done it. I have some Ph2 172 16" alloy wheels waiting to go on my 2003 Dynamique. Will i need spacers or not? Some people say no, some say yes and that...

To all the guys with 1.6 16v Clios, if you have an induction kit fitted, which one have you got? Pictures would be appreciated too. Thanks in advance

Can people please post pics of their speaker set ups from their cars. In particular the front door speakers. Also a question, will it look ok if i was to leave the original speaker covers off the doors.

Will i have any rubbing issues fitting them as is to my 1.6 dynamique? The car isnt lowered at the mo. when i do lower it, looking at a 40mm drop, will i need to do anything to avoid rubbing issues etc. Looking for help who have these size tyres on their clios. thanks in advance.

Just been sat reading my flatmates performance VW mag, and in one article, some VW mechanics actually recommend fitting one of those E-Bay resistors because of the performance gains. Now I am no expert on internal combustion engines, but I would have thought that fooling it to do something...

Think its about the 4th picture in. Apologies if this is a repost, if it is, how do you check to make sure specific pics and vids havent been posted before? There doesn't seem to be a good way. http://www.youtube.com/watch?v=V_W8zpHYEPk