Search results

Not sure if its the cold weather but the 1.4 mk1 seems to idle very high around 1,500 and higher (if thats the right measurement) cars got decat on but seems to rev so high at the mo even when changing gear sticks at nealry 2,000? what would cause this?Ryan

Out and about driving today i saw a very standard williams 3 in wikid condition on avenue of remeberence about midday then i saw a inferno 182 about 6-7 cars behind it!both looked but couldnt see any cs stickers. then saw a modified mk1phase3 red with body kit looked like a minter too, girl...

Can someone please give me a helping hand, i bought koni rear adjustable special shocks for the rear of my mk1 1.4 and the car still bounces quite a bit therefore i wanna adjust them so there more supportive (stiffer is the word!) anyway here is the leaflet which came with them on how to...

It sounds like theres a ball rolling around in the roof right above my head is this something what always happens on clios and is it easy to cure as its well annoying!Ryan

Whats the best way to treat this,its not bubbling its coming up in streaks straight off the rear arches well annoying underneath the paint work!help!

this was one hell of a cup, parked in halfords car park cowdray avenue, had buckets in and rear seats stripped and strut brace in, lowered on coilovers (on the floor) was a minter to say the least.had engine work i think with re-map had loads done heres a pic...anyone on here had personalised...

Is it anyones on here had a personalised V6 plate i think sounded wicked and looked the part,put the other cars to shame which were driving round town!

Hello gonna buy a jack tomo and some axle stands but where are the jack points a mk1 1.4 phase 3? any pictures and a description would be quality, gonna try and fit a decat looks easy;)!cheers Ryan

well saw this today a valver with smooth doors looked quite good and angel eyes havent seen these before and had oz titans on,pictures are pants its not anyone on here is it?Ryan http://img.photobucket.com/albums/v731/beatjunkie98/smooth1.jpg...

Well just had my car fitted with koni sport shocks all round and new brembo brakes, all lowered 55mm and the shocks work a treat,any one with a phase 3 with a 58mm gap on the front shocks these are the only uprated ones!! Im really pleased with the lower look (it was at 35mm front and 50mm...

Coming back from town (colchester) and get onto 70mph dual carriage way (downhill) in the outside lane overtaking and see a red nova coming towards me.....moments later its airbourne he was probly doing 60mph and i was coming closer and closer slammed my brakes on and this (below) lands 2-3...

Right decided that i need to amp the door speakers (infinitys) im already running a 4 channel amp and ive got an old sony one kicking about which is two channel should work a treat....But do i need to run a new feed from battery and new remote?or can i just take it from the amp which is already...

whats the best way to make a false floor in a mk1 clio, i need to mount a sub (already in a box only 10") and an amp i have drawn some ideas but whats the best way??? Cheers people, Ryan

ive got a mk1 clio and when on the motorway doing 70mph with or without the heaters on i get a really annoying whistling noise which takes the p!ss its ridiculous! i presume its just cross winds does anyone else have this!!!?!??? Cheers Ryan

Just won a set of lights off ebay and was gonna spray them 2 questions tho: a. what colour shall i do them? b. do i use that tint spray stuff which is really expensive? i no people will say get bump strips colour coded and smooth the boot but moneys running out...

Saw you today heading down moulsham street in chelmsford, or shall i say i heard ya coming car looked quality mate!;)

Hello ive decided that the rubber pedals in my mk1 are boring as ive been through many a rubber :oops:...pedal! Ive got a sparco gear nob so pics of your footwells would be good and please could you tell me whether they were direct fitment or drilling? Cheers Ryan

Saw this today looked amazing phase 1 which had been lowered loads with phase 1 turbines very nice!

Right people my car is a maxim 1.4 and its been lowered 2 clicks on the rear and 35mm at the front,im happy with the ride height of the rear but the front looks too high.im buying koni shocks this week and need to decide whether to get either 40mm apex springs or 50mm springs. ive already got...

Ive already got a sony one i had for ages, but its not the best i want better sound!ive got a 300watt amp which could be more,just wanted to no if there are any good quality ones kenwood would be good as amp is the same! Cheers Ryan

BEFORE http://img184.exs.cx/my.php?loc=img184&image=10001364pq.jpghttp://img184.exs.cx/my.php?loc=img184&image=10001364pq.jpg DURING http://img184.exs.cx/my.php?loc=img184&image=10001373tx.jpghttp://img184.exs.cx/my.php?loc=img184&image=10001373tx.jpg After and i think it looks alot...

Would anyone no how much extra it would cost to add lowering 40mm to my insurance on a 1.4 clio?any one had past experience with NU?

hello ive got a clifford alarm and where do most people have the proximity sensor set at because mine is adjustable and for some reason the alarm keeps going off!

hello, had a concept 300 fitted 3 months ago and the arm/disarm button on my remote doesnt seem to work any more but the other buttons are all fine some times it works and sometimes it dont (usually when im out!) Any one got any ideas where i stand with the warranty will they just replace the...

ive got a mk1 clio 1.4s and when i hit 30,000-35,000 revs theres a really weird crackerly noise coming from probly near the catalytic converter!what ever gear im in it will do it in this rev range. ive just had a ss exhaust fitted but this is only the back box so i dont fink it should effect...

can i have some advice to which is better, eg ive heard that an induction kit needs alot of cold air to keep it running well is this true?and are they hard to fit?also does an air filter element like piperx provide a small amount of noise? which is better for a mk1 1.4 s?

my remote didnt work on my mk1 clio the other day so i bought new batteries do i just open the key up with a screw driver and replace because its got an immobiliser?do u have a time limit?

ive got mk1 clio s 1.4 and have got 15 inch wheels with 195/45 tyres i would like to lower it but would like your views on the best set up dont really want any rubbing what do you think?

hello just been down the scrap yard they have got a mk1 phase3 rsi with skirts on he sed £60 for the 2 Can someone tell me if they come off clean with screws or are they bonded,also has anyone fitted these to a standard 1.4 mk1 phase 3 clio cos it looks like u need to drill holes in the sills?

Got a mark1 phase 3 1.4 should i go for a genuine renault clutch cable or do i go for a normal one from halfords or summit?getting clutch done next week!