Search results

Anybody got one, and do you think they are any good not cheap really for a bit of cloth with straps on. Was thinking of getting one for the track car as there is really nowhere to store the helmet to stop it rolling around.

Got my DAS 6 Pro last week with some Meguirs 105 and 205 with hexlogix orange and white pads, so I decided to test it out on the track car first as it had lots of surface scratches and swirls. Really pleased with the results looks like a different car now. I washed and clayed it on Wednesday so...

Had the alignment done today, I would have liked more camber but that was the max the bolts would allow. What suggestions would you have for the rear, is it worth shimming and would more camber be beneficial? It is a track car only being driven to and from track

I am not sure if I should get some polycarbonate windows for the front. I have spoken to a few people with them and get mixed views some say they are way too hot and don't let enough air in and others say they are fine, and there is also the issue of margard or not. My car is not a daily it will...

I have searched but cant find anything, has anyone moved the carbon canister to allow brake cooling, if so do you have any photos of where you moved it to? I don't want to remove it because of lights coming on and it possibly causing problems.

I will be replacing my ball joints in a few weeks and don't have a splitter. which type is best to use the fork or ones with the screw also I notice the fork ones seem to come in different sizes seen these two are they any good...

As I will be changing my inner tie rods in a few weeks I decided to make some tools as I did not want to spend money on tools that will only be used once or twice, or be struggling for a few hours. First is a old machine spanner that I cut the end off and as it was too big I welded one jaw and...

Here are a few photos from yesterdays rally at Epynt. Weather was awesome and it was a good day except for two bad crashes that needed two air ambulances, I heard today from a customer at work that one was his mate in a Darrian and he had to be cut out and he has a lot of injuries but should be...

I have got some new track rod ends and bottom ball joints but thought while I am doing them may as well change the inner tie rod at the same time. I have read it can be a pain to get to to undo it so I have decided to make a tool (like the ones that slide over the rod). Does anyone know the...

I would like to use pull straps on my CF door cards but can not find any trim pieces for a reasonable price like the ones in the photos. The CF ones are are £38 for just the trim bits and the plastic ones with the straps are near £70 :eek: streamline have a photo on their site with some silver...

Anyone used the sealey vacuum bleeder, I have a compressor so thought I may as well use it rather than get the easy bleed kit and mess about with trying to get a seal on the cap. I found one the other day for about £20 so just need to search for it again this is the one I was looking at...

Done a search but found conflicting answers. Does anyone know what thread size the front and rear bleed nipples are for the 182? M7 x 1 seems about right, found these and was thinking of replacing the standard soft ones...

Need a new front caliper (but thinking of doing the 2 for piece of mind) as the piston is not fully retracting so causing a slight drag, I have a 15% off voucher for GSF so looking at the calipers from them, by the time I have returned my old one and got the surcharge back I am looking at about...

not sure this is the right section. I am after a cheap indoor car cover for my track car, it is in the garage and the dust is building up on it and I have to keep walking past it, just looking for something to keep it clean and stop a big scratch appearing down the side. anyone got any...

I have some 15 inch pro race 1.2 et43 with 205/50/15 Federal RSR's, I am keeping standard cup shocks but putting cooksport springs on. ATM with standard springs I have between 12-15mm (measured with a fat finger lol) between the tyre and the strut. I am looking to run around 2.25deg of negative...

I got the car in October and a week after that the work started, including lots of phone calls ordering bits.:D list so far is Safety Devices 6 point bolt in cage Bimarco Futura bucket seats Bimarco Aluminium side mounts Pair of 6 point Sabelt harnesses Oreca 330mm steering wheel Flocked...

I have my ph1 indicator stalk and MOMO boss on my 182 but it is not self cancelling, is there something that needs to be done to it to make it work?

I am not brilliant with electrics so decided on another way for attaching the cruise buttons without taking them apart.

need to get me some tyres for my clio, the car is mainly a track car but it will be used to drive to and from the track and possibly the odd Sunday blast. I have always thought I would get some RSR's as they seem like a bargain, and they can be used in the wet as I don't want to be taking two...

I will be fitting a different steering wheel to my 182 but also fitting a indicator stalk with horn push, anybody know what the type of bit is to get the squib (I think that's what it is called ) off so I can get to the 2 screws that hold the indicator stalk on. Thanks

what side mounts are you using on you bucket seats

sorry if it has been covered I have searched but did not find anything. If OMP subframes were used with sidemounts how much lower is the seat compared to standard?

what offset are you running with 7x15 wheels

How heavy are the clutches supposed to be in 182's

I am playing with the idea of getting another 182 or 172 and converting it to a road legal track car with probaly cage, seats harnesses, suspension, no airbags usual sort of spec, so would need to be a modified policy. I currently insure my meg 250 as my everyday car (with greenlight) so got my...

I am thinking of changing my wheels but want to see if they will look good first so can somebody put some silver team dynamics pro race 1.2 wheels on my sea grey st and change the other photo from orange to sea grey please. thanks

over the last few weeks my desktop has been playing up screen kept freezing then started flashing between a black screen and the page I was viewing?, also the pointer would have a coloured box about 20mm sq instead of the pointer, I have also had screens come up when booting like the old...

I am thinking of getting a laptop and seen this one (recommended from my other thread) http://www.currys.co.uk/martprd/store/cur_page.jsp?BV_SessionID=@@@@1964994095.1242939106@@@@&BV_EngineID=cccjadehfjefdehcflgceggdhhmdgml.0&pageFrom=SimpleSearchProducts&page=Product&sku=557073 on...

I am thinking of getting a laptop, got my desktop for main use seen a few but don't know which is the best. only want it for music, internet, word processing nothing too demanding option 1...

Enioy