Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
When i use the volume button/indicators the console bit moves with the other controls, took the cover off and its the actual electrics unit part that is on the steering rack thats moving and the shroud etc is atached to this and thus is also loose. Can you tighten it up? i tried tightening the...
You will need the following for 172 rep (add exhaust for 182)
Wings, front bumper, undertray, 6 arch liners (fronts are in 2 parts), Grill, Rear Bumper, Side skirts, Colour coded side mouldings.
This is my 172 replica... and if your pushing the boat out xenons as well, might do them when they...
I bought some used shockers off ebay (koni sport adjustables)
There is some oil around the seal at the top is this normal? or should they be bone dry? Ive not fitted them to my car yet as wanted to check they were ok before asking for a refund.
frauds discs. and standard before that. i changed discs becuase i thought this was what was causing it as the old ones were a lil bit worn. ill try replacing the pads again.
if its not the pipework then as said at worst its the rad i would have thought, which isn't redicilously expensive, plenty of used/blueprint ones out there.
When its head gasket you will find loads of waterin your oil, if there is no mayo like substance on your oil cap stop sweating mate.
My brakes are making a whirring noise when you are nearly stopped. Seems to be the front. Thought it was worn out discs so replaced those and it continues, replaced pads a couple of months ago also. Im at a loss, have a cooked the pads rendering them useless?
thanks
josh
mine was doing this in a straight line.. Just put your left foot slightly on the brake while keeping the accelerator at steady speed. Turned out to be my brakes rubbing, took the pads out cleaned the runners with brake cleaner and copper slipped them up and been fine since.
Theyre only required if the xenons are factory fit. If theyre aftermarket you don't need washers. Its only the auto adjusters thaat you have trouble with. Without them you tend to dazzle people when you go over a bump.
Where did you source the parts?
ta
josh
how do i achieve a perfectly clean effect, in the sun it still looks all streaky and pants, ive been using glass cleaner and kitchen towel. Do i spray on the screen or in the paper to avoid it going on the dash?
thanks
josh
Need to know what the part numer is for this? if anyone has bought an ICE link plus for the tunerlist radios if you can look at your box and get me a part number, either that or tell me which other cars use the same connectors as halfords have it as not available for the clio whereas on Denisons...
mk2 ph2 1.4. When im reversing then braking im getting a loud single click like a brake pad moving or something from the o/s wheel area, anyone had experience of this, you then hear it click again when you brake in going forward after reversing.
any ideas?
ta
josh
there are often more than just 1 place you can have it done per insurance company. Ring places such as RAC vehicle windscreens and see if they can do it quicker.