ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. dann2707

    What pressures are people running in their Pilot Sport 3's

    As above really. Just got some new ones up front in 205/45 R16 and wondering what pressures people find better for these? Also how long do these take to properly bed in? Thanks!
  2. dann2707

    182 xenon not working

    Hey. Noticed last night that my offside xenon isn't working at all. I swapped my bulb over and that works on the other side so it's not the bulb! Anything else I should be looking for? Completely new to xenons so not sure what to do to check. And now this morning i've come to turn my lights...
  3. dann2707

    How to adjust headlights to optimum level?

    Hi guys. I understand I can manually adjust my headlights (182 xenons) using the Allen key hole on the headlights them selves and also the rear beam has the sensor that determines when they dip etc but how do I know where to put the lights so that they don't blind anyone? For example should I...
  4. dann2707

    Silver 182,stickers, Hunslet area, we had a moment ;)

    Who are you? You flashed me and I went crazy waving. Gf was egging me on lol
  5. dann2707

    MAP sensor O-rings

    Hello. Does anyone know where to get the two o-rings from for the map sensor, or failing that, the dimensions so I can get some? Thanks Mine has quite a few chunks taken out of both of them. Dan
  6. dann2707

    Exhaust smells of petrol

    Hey, Just wondering why pretty much my car (182) exhaust tailpipes always smells of petrol quite strongly, and after one day they go black again after cleaning them up. It doesn't seem to be running badly at all, not misfiring and over the last 3 months it's had a new genuine bosch lambda...
  7. dann2707

    Killinghall, Harrogate, Silver V6

    With the girlfriend and prematurely jizzed in my pants when I saw it! Who are you? :)
  8. dann2707

    Orange 182, Rileys, Castleford!!

    Anyone on here? Haven't seen it before! :)
  9. dann2707

    Genuine renault front wheel bearing, where from and how much?

    As above really! Are any of these decent enough quality? Link 1 Link 2 Link 3 How much should I be paying for a genuine one? Thanks!!
  10. dann2707

    Should my lower gearbox mount look like this? Car clunking when dropping clutch

    I'm thinking it's normal but I want to rule out any possibilities as to where my clunking is coming from. When I change gear and drop the clutch it's making a banging noise. The dogbone mount has been polybushed and is solid so it isn't that. The car also seems to pull you when you go over a...
  11. dann2707

    Cheapish computer deal?

    Hey. Looking at getting my girlfriend a computer for xmas as she only has an ipad atm and wants something to have in her room as a dedicated workstation. She'll only mainly be using it for music, office, internet etc no hardcore games or anything. We were looking at all in one computers and...
  12. dann2707

    Should top mounts twist when stationary?

    I'm trying to get to the bottom of my handling issues and noticed the other day that when stationary, the top mounts physically twist when I turn the steering wheel. Not a small amount too, they're moving quite a bit! Is this normal? Cheers
  13. dann2707

    Car pulling when accelerating, clunking when changing gear

    I thought my issues were sorted but apparently not. The car is being f**king horrible when accelerating, just pulling to the right mainly, steering wheel juddering when braking and pulling it from my hands and now i seem to have developed a clunking noise when changing gear. So far it has: New...
  14. dann2707

    Vx04 ukr Junction 32 or Xscape. Arctic blue

    Really nice. Lowered etc. How I want mine to look! Anyone?
  15. dann2707

    Car seems to rev when dipping clutch

    I've noticed something lately that when coming up to junctions etc and i'm wanting to change gear the car will rev ever so slightly when dipping the clutch. Almost like it's being told to do so by the ecu? Could this have anything to do with the fact that my clutch is on its way out? If not...
  16. dann2707

    Loud humming noise when letting off the accelerator?

    Hi! I've developed this problem where when i'm accelerating and letting off the pedal, or sometimes it does it when i'm accelerating lightly I can hear this whirring, a high pitched one, imagine an owl noise but constant like a wheel bearing but no where near as drony. The only way to...
  17. dann2707

    Made my own ultrasonic injector cleaning set up...

    Basically, I wanted to clean out my injectors properly! The redex crap is exactly that and I think the only way to clean them properly is to leave them in an ultrasonic bath. I researched into it whilst on my lunch breaks at work and saw that simply leaving them in an ultrasonic bath wouldn't...
  18. dann2707

    Wanting to create something. A light for the variable cam activation.

    Hey. Basically I'm wanting to make my car a little more unique on the dash by having a small led that illuminates when the engine has allowed the variable cam to activate. Is this done on oil pressure or oil temperature? Or water temp? If so how would I go about this? By tapping into...
  19. dann2707

    Knocking feeling in brake pedal after bleeding brakes

    Hey guys. I've just sanded a bit of paint off the rear brake pads so that they are more free in the caliper along with flushing out the old fluid and putting new fluid in. Now when I press the brake pedal I can feel a physical knock through the pedal at around half way this is even when...
  20. dann2707

    How to pulse an injector for cleaning. Electronic gurus required

    Hey. I've just ordered an ultrasonic cleaning bath with the intentions of cleaning my injectors. What I've read is that although it will clean them without pulsing, to get the best results ideally you want to get them moving to clean them out properly. What I'm wanting to know is...
  21. dann2707

    Car wandering, steering wheel shake

    I'm still having troubles with my car :( So far I have, Replaced rear discs with new bearings New brakes all around even New inner tracks and track rod ends Four-wheel Hunter alignment Swapped tyres over front to rear And I'm getting a steering wheel shake from 40mph onwards and...
  22. dann2707

    Do you need a press for new rear discs?

    Changing my discs slash bearings. Just need to know if I'm going to be needing a press for them? Thank you. Daniel
  23. dann2707

    Steering pulling to right when accelerating after a clunk noise? Wishbones?

    Hey. The other day after I got my tracking done u pulled up to a junction to hear a loud clunk at the front end. The tracking guy said he noticed it was pulling to the right when accelerating and thought it was just torque steer but it's not as it's low down the power band. What could be the...
  24. dann2707

    Weird noise under braking just now

    I just came to a junction to press my brakes and although they worked, I felt a dodgy feeling through my foot and an audible "knock" noise. Wondering what this is? And is it dangerous? Although just came back from my tracking being done and it's always done this but when accelerating it's...
  25. dann2707

    Which rainsport3 tyre? 3 variants

    Hey. I'm looking at getting some decent rubber for the clio. I've decided on the rainsport3's! However there are three types: 83V, 83Y and the 87Y XL What do these figures relate to? Sidewall stiffness? Which one should I go for? I do a 12 mile commute to work on standard 30/40mph roads. No...
  26. dann2707

    Show me your stubby aerials! (and links on where to purchase)

    I cleaned the car today and can't help but feel it would be complete with a stubby aerial! What do you have and where did you get it from? Signal isn't a problem as I don't listen to the radio :) Thanks
  27. dann2707

    Inner track rods and ends

    Hey. Looking at replacing the inner track rod and ends on my clio 182 non FF verison. However I've seen that 99.9% of clio 182's have the smi rack but euro car parts only seem to list the Lemforder TRW version? Anyone know what ones I should go for and where from? Cheers!! :)
  28. dann2707

    What tyres? (up to date?)

    I'm looking to replace my 2 front budgets with something decent. I need 205/45/16 as they're for my 182 The tyre poll looks to be massively out of date. What are people rating these days? Just for my daily, 13 mile drive to work etc, no track action. I know it's probably been done a...
  29. dann2707

    Just removed the washers from under the seat (cool story bro thread)

    Just thought I'd throw a thread up to disclose my findings haha. This morning I removed the 15mm washers under both seats and replaced with standard 2(?)mm washers. What a difference! It now feels so good to sit in as like others have said I now feel like I'm sat in the car and not on...
  30. dann2707

    What is the "G" on the multifuntion display?

    I've always wanted to know! When you're flicking through mpg, set speed limit etc there is one that says G. Really not sure what it is and it doesn't seem to go up in correspondence to my driving style etc? Cheers!!
Top