Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Here's my current mods;
Janspeed SS exhaust system
GDI de-cat
Mark Fish Motorsport custom race springs (10mm drop)
Mark Fish recommended camber adjustment
Brembo High Carbon discs
Mintex M1117 race pads
Goodridge hoses
Hillpower elbow
ITG panel filter
Acoustic valve removed
Superchip custom...
www.superchips.co.uk
off the shelve map £300
custom re-map on rolling road £350
Edit: Just seen that you have a 1.4, not 100% sure they do them for non-rs models.
I got a can of this when I purchased some Muc-Off wheel cleaner (which is just excellent) a month or so ago.
But haven't used it yet as like you I presumed it was a spray - it's not.
The Maxogen is probably the best on the market - it is also a very nicely made & good looking piece of kit, but I'm yet to be convinced that it is £400 better than the Renault air-box (std or modified).
I've also read that without re-mapping the car both the Viper & Maxogen will loose power...
You don't need an adaptor for the stereo to work just the renault stalk control for volume etc.
As I wanted / needed bluetooth phone connection + ipod + stalk control I went for a Pioneer system, not as nice looking IMHO as the Becker but still very pleased...
I've just had a look and you are correct they are no longer listing Becker?
I know that they used to do one as I purchased it from them direct, after speaking to Becker and confirming that I would not be able to connect both there ipod connection and a display / stalk adaptor I purchased a...
^^^^^^^^^^^^^
http://www.incartec.co.uk/
I just phoned them up and bought one direct.
Becker head units are std equipment in the Pangani Zonda - top quality stuff!
Looks very nice!
I nearly went for a Becker head unit myself - but found out that you can't have both an ipod and steering wheel control adaptor fitted at the same time.
Oh my god what are you lot like on this forum – worst than old women!
Who cares if the welds don’t look pretty it’s a link pipe – as long as it works OK and does the job!
£45 for a de-cat or £120 for a de-cat with pretty welds? The choice is yours.
I don't think any body would be prepared to have multiple rolling roads done just to prove a point with an acoustic valve.
But to me it makes perfect sense to bin it as its restrictive especially as I plan to install some of BenR's inlet manifolds and have a custom Superchips remap to get the...
1) Jack up car
2) Remove front passenger wheel
3) Remove inner arch liner to gain access
4) Un-bolt and remove, remember to block the end of the small rubber pipe.
More pics here; http://s23.photobucket.com/albums/b387/7MAT/TROPHY/CAI/