Search results

same here 195/50 15s

I ve now had my Bosch super four pluggs in for about 10 000 miles is it time to change? They are good pluggs but anyone else got a view on what i should use? I think its time cus my car seems to slightly juder/hessitate when cold(automatic choke on) and I have to boot it a bit to stop it...

supersprint manifold..i thought they were 280 but from what i can m8 out they are 130? which is a bargain.

Hi ben I also have a 1.4 with de cat and a full powerflow exhaust system I was thinking about a manifold but though the supersprint manifolds were like £280. You say they are £130? from where. I would rather get the manifold before i chip my car so that it can be set to that as well. cheers m8

could do it to most cars as long as u can fit it in. 16v and willy have tight engine bays though.

220bhp

its just about long enough it comes with a long tube on it as standard. costs 3.99 or something like that worth it though makes it so much easier.

Ben I brought a big orange funnel from halfords and it just about fitted.

Ben what were u doing? I have just changed mine elf 75/80 £13 for 3.4 litres. the hole job took me 15mins the refil took about 2mins just used a funnel.

I think the rt is 3 litres m8, gona do mine today. i think a 75/90 is best.

never buy from halfords they are well expensive for ice.

yeah a decat is a good option. also try a ecotek.

I recon I could just about afford one however I no where I am with my car i.e. any problems have been ironed out and I am happy with my rt for the time being.

Well hold on a min m8. I have both a hillpower induction kit and a moded airbox with k&n element inside but I still recon the induction kit is better, better sound looks a million times better and with a good cold air feed works well. Although the airbox does seem better on the motorway when...

still needs lowering some more though.....low rider style

I very much doubt that you or the rollers would notice the difference between the two, especially on a rt.

just keep checking and making sure they are torqued up but you will need to replace them as they are stretch bolts. Best bet would be to ring around and do it in one go probably save a lot of hassel.

Lol....you just said it mate Hillpower stocks the Hillpower induction kit. Give Nick a ring on 01530273633

Yes they can. But make sure you take it to a good dealer. I no a bloke with a rt with a 6x4 zorst which was sunk into his bumper looks realy good.

First of all get the wing mirrors etc done when your arches are done. Second of all I would lower your car first then a back box. As for the induction kit I would gut the airbox and get a k&n pannel filter in there. Either that or save for a hillpower induction kit as they are much better.

Powerflow do a tail pipe like the one you have described. Best bet would be to give them a ring to see what they quote you. This is the number for the head office so they can advise you on your nearest dealer: 01392 203050. p.s dont use any bid city tyre dealer ships.

£45 a pair from www.mcs-direct.co.uk dont think that includes postage etc.

Hi Ben Well firstly the ride will be stiffer with a full kit. And secondly no you dont have to replace the shox if u want to go lower in the future.

about the same 90-92bhp

payed 240 for a cat back stainless steel system with a 4" tailpipe. Yes it should free a couple of horses up. A cat back system and induction kit(hillpower) should free up around another 5bhp on a 1400.

the standard 1400 8v power figure is 80bhp.

Take it to a powerflow dealer they can do what ever you want. You choose the tail pipe, sound etc. As for a cat replacement pipe hillpower do one for the 1400.

o yeah and its a 94 1400 8v.

dtwd well its had the rebuilt head which is modified. powerflow cat back exhaust system hillpower induction kit hillpower cat replacement pipe ecotek valve splitfire leads on bosch super four spark pluggs. Next is a hillpower chip and I hope to be seeing around 90-95bhp when thats done.

Well it was fully rebuilt but then modified slightly, the valve seat angles were changed and I think a few other "known" restricted areas where worked on. cost 640 I think but the job was first class. p.s mines a 1400, its just that well it could be 200bhp if I went mad on it ..lol. Your...