Search results

Reading it a bit more in depth now, I just looked for tyre lists first then started realising all the rest of the changes!

https://www.msauk.org/assets/rulechangesseptember2016.pdf If Iv read correctly, its now List 1A tyres only for sprints & hillclimbs in road going class? I may have picked it up wrong

What tyres would folk like to see moved into 1B? I only started this year so hasnt effected me as much as it has others. Had heard that boys werent getting the same times with 888's this year as they were last year (unsure what tyres they were on last year but wasnt 888's)

Few run the maxxsport's in my class in the scottish series, seem to get good results All the rest run 888's, Iv got R1R's as I was keeping costs low this year and already had two. They'll become my wet tyre once I upgrade to a stickier tyre. 2Wonder if there will be any changes for next year...

Trailered for me but still kept road legal for the sprint / hillclimb class I compete in. Trailer it for the same reasons as others above. Can also make some cash on the side with the trailer aswell if you own one and have a tow vehicle

I did consider that option, of using the Schroth B23A attachments and that bolt for the seat subframe but seen a few people advise against using the same mounting points incase anything was to happen to the seat. That was my backup plan and thought Id give it a go with the spreader plates and a...

Fitting harness spreader plates today for the inside lap belt point, both lined up and marked trying to fit them in as best as possible. Problem is, the surface below isnt flush for mounting them on. Didnt want to trim the plate down at first but I gave it a go to see if it helped and it sits...

Not on a clio, but the Clio will be on the trailer :laughing: Looking to replace some lights on my ifor williams car transporter for LED items, mainly the rear lamps and number plate lamps. Side markers I was planning doing at a later date. Id read on a few sites that running LED and normal...

I am about to fit my seats and harness's into my phase 1 clio. I have done some research into this, and have a few questions. Going by guidelines, using the rear lower seat belt points creates too small an angle going by diagrams. I have seen talk of using the top mount on the top, where the...

Looking for any renault techs / someone thats had experience with Renault Koleos Car started and cut out and then failed to start last Monday, and showed injection fault on the dash. Had sat for 2 days, unmoved in frosty weather. Pumped fuel primer bulb a few times and started fine and has been...

Had read a lot of people use them and feed back in via cigarette lighter. Problem is I'll be trying to store the car inside as much as possible (granted it did spend most its time outside this year but that was till I got some space cleared that I could use and leave it without being in someones...

There is power, but being on a farm in a shed Im a bit wary of leaving a battery connected and a constant power supply connected up just incase. Will throw a charger on it every wee while when Im around to keep on top of it. And definately no bear strength here when tightening battery terminals...

On both cars its been the negative earth clamp that has been poor, fully tightened up and it can still be rotated easily and probably pulled off if enough force is applied

Iv used them on paint for years. Ordered some from a local detailing supplier and the cloths he supplied / uses are the exact same pile thickness as the Costco ones. Granted you do get thicker ones but theres nothing wrong with the smaller, less plush ones. I find them a lot easier to work with...

The neg terminal is a rubbish fit anyway, I found that before on a dci clio aswell. Is it a common thing or odd sized terminals?

Having a trawl around and seems that this is the ideal solution that Im looking for. Anyone used them? Seem to get good reviews, simple and effective http://www.amazon.co.uk/dp/B0019ULCPW/?tag=cliospnet01-21 Would use it without the fusible link as no need for radio memory or to leave the...

Looking to fit a simple battery isolator into my Phase 1 clio for times when its lying in storage unused to prevent the battery draining and also incase of any electrical issues Anyone recommend a simple method, would it be ok just to tie into the positive feed to the battery somewhere and wire...

Just taken delivery of some krystal kleen detail products ; blizzard snowfoam, screenwash and a selection of their air fresheners Heard good reports about their snow foam so looking forward to trying it out, air fresheners smell good aswell with a quick try

At this stage Im pretty sure fitting the battery in the car isnt an option as I'll be entering in road going production class. Otherwise battery relocation wouldve been quite high on my to do list. Probably wont happen unless I go for modified class

May take one step at a time and go for an oddysey which is 7kgs but still lighter than standard and then maybe upgrade to li ion at a later date Thanks for the advice / experiences

Looking for reccomendations for a lithium ion race battery. Was looking into the usual odyssey batteries until someone mentioned li ion ones and are alot lighter. Anyone running one and got experience / reccomendations?

Get properly started and stuck into it New wishbones, track rod ends and tie rods Strip carpet, remove sound deadening Sort out harness mounting points Fit seats and harness's Replace cat as its rattling and really annoying Rota slipstreams to respray anthracite Buy 2 x Toyo R1R's and swap...

Parkers site is good for towing weights. Also, you should be able to find out the weight of your trailer from your manufacturers website. Theres also the licence side of it aswell, depending when you passed your test you may need to sit an additional test to tow over 3500kg combined weight (tow...

I use the costco aluminium one. Compared to my 3 tonne SGS one its as light as a feather! Costco one is sturdy enough for alot of use at home, yet isnt too big to throw in the boot to bring along to a track day / sprint & hillclimb And with it being a decent jack, I dont have to worry about...

How much does it raise the rev limit by? I presume its safe and no supporting mods required to accomodate the raised limit? I'll be competing in sprints / hillclimbs next year and thinking thag extra revs may be handy for times when its not worth changing up a gear on short, twisty sprints

Iv been looking into this lately and seems to be fine either way. Some weld it to hold it in place as well as just having it sandwiched through, more somif you plan on unbolting the eyelet so that you dont need a 2nd pair of hands below the car Some just weld the plate itself into the car on the...

Good to hear, bit far for me to go for usual stuff and setting up but for anything more serious such as a rebuild I would consider them

Car looks spot on Neil A, seen the same ones in anthracite on a silver ph1. What wheels is that? Look a little like rota slipstreams but hard to tell obviously with movement

For the toyo fans is the R1R not allowed? Seen folk use them as wets for track days etc as their good in the wet as well as dry Im still currently trying to decide on a set of tyres for sprint/hillclimbs aswell. Been looking at the usual Nankangs and Federals and will keep my R1Rs I have just...

Car wont be used in winter so least that opens up the option a bit more. Hoping to be running two sets next year so can go for something more track focused and like you say have something for wet days / road tyre. Other option Id thought if for purely track was Kumho V70 in a soft compound. All...