Search results

oh aye they are well easy....... .....unless its seized (which they usually are) btw if you use the nut and bolt method, make sure you have a few handy, i knackered 4 nuts and 2 bolts trying to get the drivers side out, passenger came out no probs though

Re: Mk1 Hybrid Project mine had some funky adapter join (think it was so the flange could be twisted and therefore fit to a williams aswell as a valver?) which came in very handy in joining it to the 172 decat however i did have to chop the centre section down a little bit where it clamps to...

cheers Tony :)

Re: Mk1 Hybrid Project exhaust is identical to mine, i have that little centre silencer aswell, although i dont think it does a right lot!

like this (top of the pic) is that bracket custom made, or can it be bought off the shelf? or will a brake resorvior mounting do the job (like the ebay one i linked)

sorry, i dont speak warrington :dapprove: in english? brap ;)

i'll find a pic

the interior brackets people use for the pull cables, are they brake resorvoir mountings/brackets? like this http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=130011638454&Category=23013&_trksid=p3907.m29&_trkparms=algo%3DLVI%26its%3DI%26otn%3D2

dunno never used it but i was informed it was in good nick when i bought it from a low mileage car an all that shizz its free if you want it, its a 172 engine mount btw, not a kangoo one i was gonne keep it as a spare, but i think if mine (new) lets go i will be uprating to the ktec solid...

one of the members round your area must have a breaker bar they can lend you? i would but you arent exactly local lol btw i managed to bend my wheel brace trying to undo wheel bolts the garage had air-gunned on! :mad: not fun!

you want an engine mount? does it have to be new? ive got a used one you can have for nowt (i owe you!)

brap!

Re: Beautiful White Lamborghini jeebus!

here ya go my pedigree chum :D http://cgi.ebay.co.uk/5-GT-TURBO-CLIO-172-MEGANE-19-16V-ALPINE-GAUGE-ADAPTOR_W0QQitemZ120369270254QQihZ002QQcategoryZ10410QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262 had to lol at the advert where he says 2 blanking screws are provided, i've lost both of...

i have indeed, cant tell you if its ok as i haven't been able to start the car yet (lost a grub screw from the sandwich plate so oil would just pi$$ everywhere lol)

thats bad mkay!

no ebay special lol from a reputable seller though

no im sure there isnt one on mine either, hence why i had to get another sandwich plate with ports to fit oil temp and pressure senders

say what? are you meaning on the sandwich plate?

i know that feeling, i got more rust than metal with mine :( i should if scrapped it when i found the rotten sills, carrying on against your own better judgement FTFL!!

not having much luck with this one are ya pal! :(

if theives wanted to steal my car they would need a low loader fo' sho' main reason at the min is that even i cant get it started lmao, but eventually it will have: quick release steering wheel (removed whenever possible) a set sequence of toggle switches to activate the fuel pump an fia...

Re: Valver Track Car Project Thread sadly luck of the draw :(

Re: Valver Track Car Project Thread lol i got quotes of £900 for the valver from adrian flux, bearing in mind it has no recognised security features on it! rang them back and spoke to someone with an understanding of what i was using the car for down to £484 tpft insured 'between the...

Re: Mk1 Hybrid Project you need a 5 ribbed belt mate known issue with the 6 ribbed rubbing on the cambelt cover ;)

now i know this is a forum, and i shouldn't even bother saying this...but..... FFS why are you getting wound up about someones opinion on what suspension is best for their needs? just because you think that god himself hand made your sachs dampers and that replacing them is a sin and...

Re: My mk1 track car blog cheers guys, yeh i have been looking for some reasonably priced solid top mounts for a while, these are ideal! oh and there may be a bit of a change of lifestyle for the clio, but all will be revealed fairly soon :D ;)

Re: My mk1 track car blog right managed to get some time on it recently firstly i bolted up my mocal sandwich plate and second sandwich plate for the oil gauges, wasnt a straight forward job as its pretty tight for space in that area already then wired up the gauges, turned ignition to...

sounds like my wiring :o

anyone know why the pics are blocked for me? says 'blocked due to category criminal skills' (work pc) every other photobucket pic works ok :(