Search results

Mine does this with my Yozza when cold . I think it's just a bad join either between the centre section and olive joint on the Cat or the exhaust manifold and Cat , not sure which . Once it's warmed up it stops . I'm assuming that the exhaust expands just that little bit when it's hot and it...

Anything that is easier , quicker and gives the same/better results has got to be a winner for me :smile: I never tried it on my alloys , but i tried it on the glass though and it lifted alot of contaminants off there too . Another very easy good product to try is hyrdo2lite . You might want to...

3 for 2 at Halfords so works out at £8.66 each :smile: Use it like a wash mitt , you don't need to apply any pressure , basically the weight of the sodden clay mitt and your hand is enough pressure ...

Nice to see somebody else who thinks the G3 clay mitt is a good product . So easy to use with fantastic results , so much easier and quicker than using a clay bar . I got slated off the detailing Police on here the other day for saying how good it is lol :wink: . They said it can't possibly give...

Genuine Renault ones or cheapo ones off ebay , they all sag after a while . I got some new ones , put a couple of cable ties through the rubber hanger and around the bracket because the rubber does tend to peel away from the metal after some time. Then I filled in the gaps with high temp...

Ok , you and your chuckling experts . You have your opinion based on " physics " . I have my opinion based on fact . I'm gonna leave it at that . Because like I said previously , CS never changes as the years roll by :tonguewink:

Looks like War n Peace part 2 to me . Like I said , I'm not an expert Chap . I'll ask you a question JD . I would like an honest answer . Have you actually used the clay mitt I posted a link to ? And I most definitely don't claim to be an expert in anything . I can only give my honest ...

I must be talking out of my ring piece then or it's just a figment of my imagination . I can only go off my experience . The car IS tar free , free of any other contaminants too, just as it would be if I'd used a clay bar . And it most definitely hasn't suffered any marring. Where did I even...

Well it didn't mar on mine . And seeing that the OP has exactly the same colour as me , if he uses it correctly he should be fine :tongueout:

Mine was covered in tar and other contaminants , especially around the bottom of the doors , sills , rear wheel arches , the clay mitt removed all of it effortlessly and it was like glass when finished, better than when it was new . If you're a lazy f**cker , same as me , try these 2 products I...

It Won't mar your paintwork if used correctly . I used a bucket of strong shampoo as lubricant and one bucket of clean water to rinse after so many passes , you only need to use light pressure , basically the weight of the wet mitt and your hand , no need to press on . So much easier than...

Polishing should remove the wax . Another good product to use would be the hydro2lite . I've got it on on my Arctic blue , it's still beading really well . Also try a clay mitt instead of clay , takes about 1/10th of the time to clay your car than traditional clay ,it's so easy to use ,you'll...

Its very shiny , considering it hasn't seen any polish / wax products since last November . Like i said previously , one of the guys at work asked if I'd just washed the car . It's a must have product imo .

Try some Hyrdo2lite . Fantastic stuff , beads as good as any wax I've used . This pic was taken about 15 mins ago . The car was last washed over 3 weeks ago . Someone at work last night actually commented on it and asked if I'd just washed it . It's probably one of the easiest products you'll...

Sorry, I meant why would they remove that info, not why do you want to know lol.

Looks like they've removed that info for some strange reason . Why ??

http://renaultsportheritage.co.uk/ Specifically for the Clio http://renaultsportheritage.co.uk/clio/

Spotted this morning in Darwen about 7.50am . I was in the Arctic 182 behind you .

439

No , no and thrice no , because they look shite .

I got round to using the Clay mitt today . What a brilliant and easy thing to use . I washed the car first with my trusty 17 year old Karcher pressure washer , water only . Then connected a 25 litre fermenting bin with approximately 2 capfulls of shampoo and 2 capfulls of snow foam then gave it...

I've always used Avast free anti virus with no problems .

If the new manifold to Cat kit has been fitted correctly it shouldn't really blow now . The only way to really tell whereabouts it's blowing from would be to get it up on a ramp or get under the car with the engine running and have a look , put your hand near the joints and feel for it blowing ...

Standard 182 exhaust and Cat ? They blow from the olive joint where the Cat meets the centre section . It's a common problem , crap design . You could try a new exhaust clamp and some high temp silicone sealant . Some people do away with the oilve joint altogther and have a piece of tubing...

Did it work ? Connecting to a usb sata cable ?

Its worth a try . Good luck , hope it works .

I had this with a hard drive that was knackered , just wouldn't boot , i tried everything . I took the old knackered hard drive and connected it to a USB sata cable , plugged it into my desktop pc and retrieved all the photos this way ...

I knew i only needed one mitt . I only bought 3 mitts because of their 3 for 2 offer and I didn't really need anything else . I'm going to offload 2 of the mitts to 2 guys at work for 9 quid each lol . The paintworks in pretty decent condition for a 9 year old car that has only ever had...

I've seen lots of positive things said about the clay mitt , even from people who are quite skeptical , then their opinions have changed after using them . I'm not sure it could be called a quick fix as such , just a newer method / alternative to traditional claying . I was hoping to give it a...