Search results

Dephaser pulley by the sound of it! Don't drive the car! The part is around £100 from Renault and you will need to replace the Cam-Belt as well. If it's been done recently, just replace the belt, as the tensioner etc should be fine. Just read you're due a belt change, so just do the whole lot...

To check if it is the sensor, dip the oil using the dipstick. Then, after switching engine on, the car should show up 'oil ok'. If you hit the reset odometer button when oil ok shows, it will show you the oil level. If this is ok, I'd be looking at replacing the oil pressure sensor!

Can we get a list of those going?

I got this on my car from the bodyshop. If the car is wet and you put the car sheet over it, it leaves marks behind. 3m Fast Cut on a 3m Green pad and rotary will remove it. Just go easy and remember to refine with a lighter polish after!

Haha! Just a wee pic whilst balancing on the wing of the plane!

Was that you in the Silver RS Twingo?

Yep mate will be goin through Larne! There's a thread about it on RMS if ur on it? Ask Suitor when we'll b in Larne!

SQ Design Run up the Coast is on again this year. Meeting at Halfords Belfast at 10.00 All Proceeds in aid of Ulster Cancer Foundation! Would be great to see you all there! Can we get a list? This will be my 1st run out in the 225

Thanks for the comments guys! Driveway really does piss me off! Especially when the Meg's Handbrake needs tightened! Spoiler is just painted black! I think it looks really well tho! Found a few good roads off the A75 at Kirkcudbright!

I love the sideskirts and the wheels! So sorry, but I'm keeping them! lol! Thanks for the comments guys! Just need some time now to detail her! And get my plate on it!

Picked the car up yesterday in Newcastle! Had an amazing drive up to the boat! Car drives so well and the power is brilliant. Stopped off at Hadrians Wall for a few pics on our way to the boat. Some class roads up around there! Enjoy! Stuart

Looks really well. Did you seal/wax it as well?

It'll make it look worse. Leave it dirty or wash properly!

I did a full correction and interior detail on my girlfriends sisters Mini last week. Took me 14hrs. Told her I'd do it for nothing, as I didn't use much products and wanted before and after pictures for my website. She was so pleased with the results she paid me £50 anyway! Wouldn't think of...

I had a DCI 100! Best diesel car I've owned! So much fun! I had mine tuned and she went very well. And they return around 50mpg!

I wouldn't attempt it unless you know what you're doing! You def need a ptg for machine polishing! Also use a da for the wet sanding. I used 1200, 1500, 2000 and then finally 3000 all by da, then machine polished with Menz and finished with Onyx

All the same!

Hi, My dad has a 2.2 DCI Laguna II. Engine management light came on and car is in limp mode. Error codes scanned are B0500 and P0711. B0500 is undefined code and P0711 is transmission Fluid Temperature Sensor Circuit Range/Performance. Car has a manual gearbox so it doesn't have a...

Common problem with Mini's! Clips break so easily! Sorted now tho!

It was nearly dark and the car looked worse with the flash on! Light conditions were crap! Lol

The GF's away for the weekend and left me her car to drive! Decided to give it a quick polish and wax yesterday! She's back tomorrow nite and knows nothing about it!! Washed Clayed Washed again with snow foam Engine bay washed and dressed with AG Tyre Dressing Inside hoovered and...

They probably chose the colours for that reason alone!

They scratch really easily! Need a good wash method. They do look stunning when clean tho!

You can get removal tools that fit onto a ratchet and go over the end of the filter like a socket. I think halfrauds do them! Like this 1 http://www.pvrdirect.co.uk/products.aspx?tier1=Sealey+Tools&tier2=Vehicle+Service&tier3=Oil+Service+Tools&cmd=list&gclid=CL6JoP-_5J0CFYIA4wodSwpfKA

Do Z"mol do any products under £100???!!! :rasp:

Hmmmmmm! Do I need more detailling stuff!!!!

Can this be used by rotary?

23k on it from new! Took it a run today! It's class! Yep, that my 330CI and the Mrs's Red Mini!

Rubbers were in really poor condition! The menz actually helped them!!!

Girlfriends Grandad wanted his Rover de-hologrammed after he got it resprayed. Bodyshops really don't take any time to finish a car. Used a white lcc pad with Menz Final Finish and the results were amazing! The polish gave an amazing depth to the paint and topped off with Swissvax Onyx, it was...