Search results

When you say a bit jigly round town lol, is it a jumpy ride at low speeds? Only want to know as I wanna order a set!

i gave up, wheels are in for refurb and paint now!

Pretty sure they are at the front of the engine as you look at it and are hidden somehow by the top cover on these. When i say cover, i think it's the inlet manifold.

Not always worth going to the 'cheapest' place as sometimes you don't know what your getting for your money, so make sure you see a specialist. BTM/Birchdown will see you right.

Re: someph-ing different........... what?! them seats are gorgeous mate why you changing?

nice one, mig welders are ace!

Cheers mate, I'll pm you if I have a problem!

Steering wheel - steering coloumn - steering rack. Then on the steering rack you have a tie rod either side, and then a tie rod end on the end of each rod. These tie rod ends, connect to the hub on either side of the front of the vehicle which allows for the steering action (turning wheels)...

How long to leave in between coats you reckon, I think this is where I went wrong last time.

Ok, so base coat being primer first?

I know it's a toss up between the two! Do you reckon I need to sand off all the paint I originally sprayed on or do little bits like say underneath in the nooks i could just take a bit off?

i've been using 60 grit for the last couple of nights, not really getting anywhere fast.

That ain't really the problem I'm facing at the moment, it's removing the bloody paint!

+1 on that, great advice!

yep get it out mate, makes sense too. shouldn't be too much of a pain if you've got the right stands and enough space to put everything properly.

You'll notice it don't worry. Very audible screech noise that just doesn't sound healthy.

i have as you put now stopped effing about with them. spent the last two nights rubbing them down - ain't getting anywhere fast! will call you in the morning ;)

haha you wouldn't get the same love though ;)

I'm having mine done orange, black also looks great coupled with coupled with colour coded mirror caps.

yep both numbers are the ones you want.

Fair enough I'll give that a blast!

I guess that's where I went wrong last time and ended up with the drips as I was over compensating it with just one spray action instead of doing the nooks lightly first then?

looks like renault still haven't sorted the problem, sounds like it's just normal!

With a spray can for the nooks and crannies or a brush?

Anyone got any ideas on the best way to spray the inside of an alloy wheel properly with avoiding getting paint drips?!

;)

Isn't it EJM? They're a pretty good place apparently.

Fit the INA kit. INA kit will come with the core plugs (gearbox side - part numers 2 & 16 in the diagram) in the kit, cam seals I'm pretty sure they come in the head set, but to buy seperatly you have to get them from Renault.

haha never mind, top stuff that fuchs is.

we do all of it apart from the castrol gear oil....ours is in Fuchs, the same as our engine oil.