Search results

Are the bosch lambdas any good? 50 quid for one, or 130 for oem

@White16valver good shout, I have clip so not sure what that will tell me but worth a shot.

It was an optional extra iirc (everyone ticked it)

Someone would buy it happily. Exhaust get used on here, gearbox just look the other way (until it craps itself), new inners/outers and rack bushes for steering around £100 ish, alloys used on here or refurb some places charge 25 quid per wheel hardly a set back, new alternator? Injectors? The...

The vibration may die down a bit once the mounts have settled a bit. I had a black insert which was super loud, just took it out and have the dog bone mount with a vibra technics gearbox mount now

In limp mode I get the coil in the centre of the dash but nothing else when its not.

This is getting worse and worse, just went out today and 15-20% throttle position is almost max on the engine. It will feel hesitant/laggy when keeping it constant then just a bit extra on the pedal and it jumps. Also the cars been going into to limp mode recently. It does get up near the...

@scullyg40 Whats your plan with the laguna/cup racer hubs? I got a pair recently but its the coilover that is the problem, either find some original ones or get your ones custom mounts

@George@RTR_Parts 04:56 (y)

@pule333 Not working for me :unsure:

Just ordered them. Nearly have all the parts now, waiting on some brake line and trying to decide about the mc, new on or rebuild, new one £££ or rebuild £ Possibility that rebuild = :poop:

Whos done this and where did you buy the seals from? Biggred site isnt clear but this seems to be the right thing https://www.biggred.co.uk/mastercylinderrepairkit_brm1569

Not much room..

Thanks guys. Kyle sorted me out on the fronts, rears Im thinkin just get used stub carriers at those prices and hope for the best!

@hipwell Is that with esp as well? I never even noticed what esp did

Of course I was joking. People get a mot repair bill for 300 quid and scrap it because 'the cars not worth that', 300 quid is cheaper than a new car

Should of just scraped it, waste of money

After a lot of different setups Im going back to standard. But of course I have no abs sensors nor the pump or lines so am wondering about sorting the sensors as they seem to cost loads. Are they cheap ones okay? Getting front/rear hubs from someone breaking with them intact?? Its a 182 ff btw.

You mean the e46 m3 csl pump? I watched that driftworks build and thats what he used he said it was progammable like the motorsport ones! I looked for those today funnily enough but didnt spend much time probably cost a lot more. I found this company that seem to be huge crooks and sell renault...

This is what I was trying to make, was about to trim the plate around the block and then just fasten to under the rez bottle. Well It will come in handy for something Im sure

Whats got me interested is programming the epas to increase/decrease resistance the slower/faster you go. That coupled with geometry changes to give more steering feedback/feel I reckon its not all bad! My steering has got so much self centre demand I reckon its got more resistance than manual...

What alignment settings are you using? And how consistent is the resistance when quick changes of the wheel?

@JamesBryan I see em (y) Should be total 50 quid for the discs and tool not too bad

What sort of discs did you get? Theres plenty of chinese stuff on ebay I cant tell whats the decent ones

@Cribert Precisely the oem door card and some fomex sheet. I cut out some sheet before using a jigsaw and it wasnt ideal but got the job done.

Anyone got one of these? Will use it for cutting plastic and lighter stuff not needed for wood or the likes, which I read it wasnt up to the job.

My subframe is covered in holes mate I wouldnt worry that its not perfect out the box. Seating position is very personal and such a hassle to get right. I use @JON FOZ mounts, these are lower than omp or sparco, I use them with a seat slider and it allows me to keep my seat low, with omp Id...

Taking it to a decent tuner?

Cant comment on how they are in comparison to the older version but after setting the pressures correctly Ive found them perfectly fine, safe for roads as of right now, dont see why theyd be much worse a few deg colder. Just dont expect to be able to full send from cold, I did the worlds longest...

That reminded me I think the cup has a smaller washer bottle as well and no headlight washer pump