ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. 16v_paddy

    Gone for some vtec y0!

    1st job was to drop all the fluids. My car has a magnetic sump plug & when I undone it I was greeted by quite a lot of water which seemed odd at the time, then came the oil followed by a bit of light being shed upon what damage I'd done Once I'd got the downpipe off, I crawled out from...
  2. 16v_paddy

    Gone for some vtec y0!

    Time for a little update. I failed to get my track car ready for a trackday at Castle Combe back in June so ended up taking the ATR. Because 2 of my semi slick tyres were buggered I eneded up taking just 2, fitting them to the front and putting my most worn Potenzas on the back and all I can...
  3. 16v_paddy

    Another Mk1 coming out of the woodwork

    This is due an update Just for the lolz, hovercar y0! Super dooper new & better fitting radiator made by Radtec 8 week delay courtesy of Piper being useless, sending wrong lifters then telling porkies that the correct replacements had been made & sent but head fully rebuilt, 16 new...
  4. 16v_paddy

    Williams/172 shared parts

    182 Cup wishbones are the weapon of choice for the extra castor
  5. 16v_paddy

    Williams/172 shared parts

    172 springs are a direct replacement for Williams springs
  6. 16v_paddy

    Williams/172 shared parts

    The mk2 subframe is also different, 182 cup wishbones also look identical but it's tiny differences that are only noticeable if you take lots of detailed & accurate measurements between them that make up the bigger picture
  7. 16v_paddy

    Another Mk1 coming out of the woodwork

    It's massively less restrictive than the supersprint that used to be on it nevermind the OEM one lol!
  8. 16v_paddy

    Breaking cover......*AG content from page 45*

    That made a tent in my trousers, if that was in front of me I'd be licking it quite a lot tbqfhwy :tongueout:
  9. 16v_paddy

    Another Mk1 coming out of the woodwork

    Here's a better pic of the manifold now it's off the car, 1st time I've actually been able to see it properly lol
  10. 16v_paddy

    Another Mk1 coming out of the woodwork

    She's in the workshop now A couple of pics of the sexy as fcuk manifold and a pic of the ride height with no engine in
  11. 16v_paddy

    Gone for some vtec y0!

    Looking back on my short stint of ATR ownership so far, I've done quite a fair bit to it so I thought it'd be worth collating it together How it all started, with a bit of a scabby front end but mechanically good Several months of pretty much hassle free motoring passed with only fitting new...
  12. 16v_paddy

    Another Mk1 coming out of the woodwork

    I wouldn't call it work, the bloody thing has been dumped in the garage & not been touched for 8 months & buying a Honda stopped me from doing anything to it lol!
  13. 16v_paddy

    Another Mk1 coming out of the woodwork

    A short while after the disaster the car was booked in for a full custom exhaust to be made & as the guy doing it had a 6-8 week waiting list to get in we went ahead with it anyway. 1.75 inch primaries into 2 inch secondaries then 2.5 inches all the way to the back After the exhaust...
  14. 16v_paddy

    Another Mk1 coming out of the woodwork

    Suppose having to re-do this will teach me not to use facebook for image hosting
  15. 16v_paddy

    How to watch Android content on a PC

    I think I've got a unique problem to try & get around. Background info 1st, this is for when I'm not at home so a wifi based solution isn't what I'm after. I want to use my phone - which has unlimited data - to watch netflix but as I despise watching stuff on a small screen I want to show it on...
  16. 16v_paddy

    [Nov 29, 2014] Surrey Rolling Road Day (Farnborough)

    I'd like to share this on here so everyone is aware & that Bass & myself will be sorting this out on the day.
  17. 16v_paddy

    New paint advice

    It was contaminant free on the freshly painted bits then after a couple of days inside the painters unit it went straight into my mates unit where I spent a few days crawling all over the freshly done bits whilst shouting & swearing, crawling along a floor caked in all sorts of car fluid related...
  18. 16v_paddy

    New paint advice

    I'd like a bit of advice regarding new paint & looking after it as my car cleaning/detailing skills/knowledge is limited to blast with snow foam, the wash mitt & 2 buckets method of washing, clay bar follwed up with super resin polish & extra gloss protection :blush: I've just had the front...
  19. 16v_paddy

    Where to buy wheel studs

    Try http://www.rallydesign.co.uk/ they should be able to find what you need
  20. 16v_paddy

    A few questions - ITB related

    I'd say yes as it's a case of fit & forget and be left with a problem that you'll never have to worry or think about again. As long as you fit a sandwich plate with a thermostat that is
  21. 16v_paddy

    Mini GT4 awesome project inside

    YAAAAYYYY!!! :clap: Now my life is utterly fcuked again as I'm desperate to see the next episode :cry: :banghead:
  22. 16v_paddy

    A few questions - ITB related

    If the oil gets too hot it basically gets too thin to do it's job properly so could potentially munch the engine. With a cooler and good quality oil you can essentially just forget about it, not have to worry & just keep hammering the car. I did just that on my 1st ever trackday, paranoid as...
  23. 16v_paddy

    A few questions - ITB related

    It's the same with mk1's of the high comp itb'd variety, the VAG (not sure if it's a polo 1 though) rads people use don't seem to cope very well, they're fine with standard comp though. Just 1 of those annoying extra expenses when going for the silly spec engines :)
  24. 16v_paddy

    A few questions - ITB related

    Having itb's on mine makes it easier to get at the filter but it's a mk1 with F7 engine, filter in the same place as an F4. Must just be a mk2 problem then lol!
  25. 16v_paddy

    A few questions - ITB related

    Filter & backplate from Jenvey http://www.jenvey.co.uk/ I'm a bit stumped as to why you'd need to remove the bumper to change the oil filter tbh :S but the parts to relocate it are readily available from rallydesign http://www.rallydesign.co.uk/index.php?cPath=340
  26. 16v_paddy

    Tax Disc holder, now what?

    I've got to display a tax disc sized parking permit in my windscreen, the funny thing is that the permit shows that the tax on the parking space at work has been paid for so can't escape the b*****d tax part of it :mad:
  27. 16v_paddy

    Mini GT4 awesome project inside

    There's only 1 thing I hate about this, after watching the 1st 5 episodes 1 after the other, the wait for the 6th annoyed the hell out of me & the wait for the next installment is killing me lol!
  28. 16v_paddy

    Gone for some vtec y0!

    I've been driving a gutless n/a volvo estate rammed full of tools & other assorted crap as my daily for a while so the mpg of the accord will be a treat :rofl: For me it's just about having something that's quite nice & civilised to use day to day but still interesting enough to have a bit of...
  29. 16v_paddy

    Gone for some vtec y0!

    I'm on the ring road near city hospital, can take you for a spin & show you what to look out for ;) If it's any help, I'd take one of these over a 172 without batting an eyelid, it's a much nicer car to be in imo & the diff makes such a massive difference
  30. 16v_paddy

    Gone for some vtec y0!

    I've been after 1 of these for a while now & this 1 came up for sale at a price I couldn't afford to say no to. Picked it up over the weekend & it has a few unusual goodies on it like a bose stereo & climate control from the type v, it's also got leather door cards, electric rear windows and...
Top